.

Chrysler Flex Fold Tester

Product Information:

Flex and Fold Tester determines the breakdown resistance of leather, vinyl coated fabric, synthetics, rubberoids, paper, and the like. Product applications which call for flexing and folding may cause your material to split, crack, craze, or separate at the seam. To predict these types of degradation, it is important to simulate the mechanical action taking place in your product's service life environment. The flexing action replicates the physical stresses normally exerted on fabrics and other materials in various automotive, commercial and industrial environments, allowing you to predict the durability of the materials when assembled in their final form.

Test specimens are easily clamped into one of four sample positions. Three of these positions perform flex testing. The sample is held under a uniform tension of the while moving one end of while moving one end of the sample through a given distance each side of the perpendicular. This action creates flexural stresses and strain on the sample, which simulates normal wear and causes the material to break down. A change in length of the sample gives a further indication of the material's breakdown.

Once elongated to the point of failure, the bottom of the sample holder triggers a shut-off switch to automatically conclude the test. Upon conclusion of the test, the operator may record the number of cycles indicated on the cycle counter, remove the failed specimen and restart the test for the remaining samples.The fold test is conducted on the fourth sample, which is clipped into place between two plates at the far end of the instrument. The sample is folded against itself with the finish side out when the two plates are pressed together under a specified tension.Optional digital cycle counter is available.

Chrysler Flex Fold Tester Technical Parameters:

1.Tabletop design.

2.Capacity for testing three flex specimens simultaneously.

3.One fold sample capacity.

4.Each specimen holders may be tensioned individually.

5.Stroke Length: 2.75 inch.

6.Clamp separation: 152mm (6inches).

7.Stroke Rate: 35 CPM.

8.Tension Load: 8 lbs. Adjustable.

9.Pressure plate load: 641N (12lbf) when closed.

10.Specimen size, flex: 76×203mm(3×8inches).

11.Specimen size, fold: 129×129mm (5×5inches).

12.Electronic cycle counter with reset.

13.Electronic counter: 6 digit.

14.External dimension: 36×12×22inches (L×D×H).


Send product request

To: Standard Groups
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

fingertip hand abrasion tester
fingertip hand abrasion tester Functionality of a product is considered as a matter of course, so the perception of quality is determined primarily by the visual appearance. Dam...
Monomer combustion test device for building materials
Monomer combustion test device for building materials Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C...
Fuel Cell Air Intake Filter Test System
Fuel Cell Air Intake Filter Test System The Fuel Cell Air Intake Filter Test System is designed to evaluate air intake filters for fuel cells, using both particle-based aerosols and test ...
Schopper Abrasion Tester
Schopper Abrasion Tester Textile Industry: Evaluating the abrasion resistance of fabrics, carpets, curtains, and other materials to optimize fabric structure and surface tr...
Air Permeability Tester
Air Permeability Tester Air Permeability Tester of textile fabrics complies with ASTM D737, ISO 9237/7231, BS 5636, etc. It is used to test the resistance of the flow of a...
All supplier products

Same products

Air Intake Filter Test System
Air Intake Filter Test System Seller: Standard Groups The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
Mattress Spring Fatigue Tester,ASTM D3574 ,how to test mattress for sagging
Mattress Spring Fatigue Tester,ASTM D3574 ,how to test mattress for sagging Seller: Standard International Group (HK) Limited The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
Mattress Rollator,ASTM F1566 ,Mattress Durability Tester,Mattress Fatigue Tester
Mattress Rollator,ASTM F1566 ,Mattress Durability Tester,Mattress Fatigue Tester Seller: Standard International Group (HK) Limited The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
HD2 Pneumatic Foam Fatigue Tester,ISO 3385,Foam Fatigue Testing Machine
HD2 Pneumatic Foam Fatigue Tester,ISO 3385,Foam Fatigue Testing Machine Seller: Standard International Group (HK) Limited The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
VW Heel Abrasion Tester,ISO 4649 ,Heel Performance Testing Machine
VW Heel Abrasion Tester,ISO 4649 ,Heel Performance Testing Machine Seller: Standard International Group (HK) Limited The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...