Automotive Wires Flammability Tester
Compliance Standards
- FMVSS 302 (Federal Motor Vehicle Safety Standard)
- ISO 6722 (Road Vehicle Cable Flammability)
- UL 94 (Tests for Flammability of Plastic Materials)
- LV 214-2 (Mercedes-Benz Flame Retardancy Spec)
- SAE J1128 (Low Voltage Battery Cable)
Technical Parameters
| Parameter | Specification |
|---|---|
| Flame Height | 20-175mm (±1mm) |
| Flame Temp | 950°C (±10°C) |
| Burn Duration | 0-999s (±0.1s) |
| Sample Size | 356×100mm (Max) |
| Gas Type | Methane/Propane (≥98% purity) |
| Burn Rate Accuracy | ±0.1mm/s |
Key Features
- Vertical/horizontal flame chamber
- Automatic flame application/retraction
- Real-time temperature mapping
- Smoke density measurement (0-100% obscuration)
- Self-extinguishing time calculation
Test Capabilities
| Test Method | Standard | Parameters |
|---|---|---|
| Horizontal Burn | FMVSS 302 | 100mm/min flame spread |
| Vertical Burn | UL 94 V-0/V-1/V-2 | 10s flame application |
| Glow Wire | IEC 60695 | 550-960°C test temps |
Measurement System
- High-speed IR thermography (1000Hz)
- Laser smoke particle counter
| Flame ionization detector (FID) |
- Microsecond-resolution timers
Standard Configuration
- Stainless steel test chamber (500×500×500mm)
- Adjustable specimen holder
- Precision gas flow control (0-10L/min)
- FlameTest Pro analysis software
Automotive Options
- EV battery fire simulation module
- Toxic gas analyzer (HCN, CO, NOx)
- High-voltage arc tracking detector
- 3D flame propagation analysis
Safety Systems
- Automatic gas shutoff valve
- Explosion-proof fume extraction
- Emergency purge system
- Thermal overload protection
Test Protocol Example (FMVSS 302)
- Precondition sample @23°C/50% RH for 24h
- Mount specimen horizontally in holder
- Apply 38mm flame for 15s
- Measure burn rate between 25-150mm marks
-
Calculate maximum spread rate ≤100mm/min
Send product request
Other supplier products
 |
Comprehensive oil filter tester | 1. Application Scenarios This test bench is designed specifically for evaluating the performance characteristics of internal combustion engine spi... |
 |
dynamic fatigue testing machine | Theseam fatigue testeris designed to evaluate the fatigue resistance of seam on the material which is applied on the surface of automotive seat.The... |
 |
Multi-function Scratcher | The Multi-Functional Scratch Tester suits automotive interior materials like plastics, rubber, leather, etc., for scratch resistance testing. It in... |
 |
Building material flame retardancy test furnace | Technical parameters: Gas used: methane flow rate （35 ± 0.5）L/min, its purity is greater than 95%, air flow rate （17±0.2）L/min Spec... |
 |
Architectural Coatings Stain Resistance Tester | Standard GB/T 9780-2013(China’s national standard for evaluating stain resistance of architectural coatings via reflection coefficient ana... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
