EN20344 Sole Flexing Tester
Install the sole test piece on the EN sole flexing testing machine, so that the incision falls just above the center of the rotating shaft of the EN sole flexing testing machine, and drive the test piece on the shaft through the machine to stretch flexing (90±2)º .After a certain number of tests, measure the length of the incision of the test piece, and evaluate the torsion resistance of the test sole by the growth rate of the incision.
Technical parameters
| Test number |
Three outsole can be tested at the same time |
| Flexing degree |
(90±2)º |
| Speed |
(5 to 150)r/min adjustable |
| Volume |
1000*300*530mm |
| Diameter of flexing shaft |
30mm |
| Weight |
118kg |
| Power |
190w |
| Power supply |
AC220V,10A |
Standards
GB/T2099 ,EN ISO 20344.EN ISO17707.EN-344 and SATRA TM161
Other supplier products
|
|
Wet Abrasion Scrub Tester |
Scrub abrasion testerIntroduction
The painted or uncoated surface need use a brush, sponge, scouring pad, sandpaper or other methods to test the r... |
|
|
Random Tumble Pilling Tester |
Applications
This instrument is widely used in the following fields:
Testing
Quality inspection
Apparel fabrics and home textiles
Textile manu... |
|
|
Water Vapour Permeability Tester |
The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requirements of the... |
|
|
Glow wire tester - Test Equipment |
F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
|
|
Oil Filter Performance Tester |
The Oil Filter Performance Tester evaluates the durability, efficiency, and fatigue resistance of hydraulic and lubrication filters under repeated ... |
All supplier products
Same products
