Full Face Masks Flame Resistance Test Machine

Fireman fire-protective clothing is mainly composed of jacket and bibcomposition,may also wear fire protective helmets, fire protective bootsandfire-protective gloves!

Each set must befitteda serial number of check marks with strong national fire equipment quality inspection center is to be manufactured.

This machine is designed andproductedaccording to GA 124-2013 latest version of the standard development; meet the standard tool for back, back with a belt buckle, bottle protective cover and full face shield barrier combustion performance test; the instrument is intelligent, touch-screen control system; the freedom to choose different samples of test procedures; and test results are automatically saved.

Standards

• EN 136: Respiratory protective devices - Full face masks - Requirements, testing, marking

GA 124-2013 latest version of the standard requirements

Structure

1. Cabinet is painted, elegant appearance;

2. The full face mask and back strap with a combustion device with platform integration of structural design;

3. All toolings are made of stainless steel, appearance, corrosion resistance;

4. pressure gauge and a pressure regulating valve;

5. Needle valve control the flow rate of the burner gas ;

6. PLC and touch screen control systems; test interface is easy to operate;

7. The system automatically timing, the heat data is automatically recorded and stored;

Full face mask test section:

• Burning test private metal mould

1. Six imported burner nozzle, you can control propane and air flow rate,

2. Burner nozzle height can be adjusted up and down; 250mm from the outer surface of the specimen,

3. Pressure gauge and regulator valve regulates the burner gas pressure in the range of 0 ~ 10kPa,

4. Gas automatic blocking device, which blockedgassupplies when the test is 5seconds,

6. Automatic ignition, switches off automatically after 5s ignition;

• Back with strap test section:

1. Stainless steel baffle plate, appearance and corrosion;

2. Imported Bunsen burner, gas and air flow rate can be adjusted;

3. Torch lifting device; stainless steel sample holder;

4. Automatic timing;

5. Flame height is 40mm; the temperature at 20mm is 800 ± 50 ºC;

6.utAomaticignition, turns off automatically after 20s ignition;

Specification

Size: 1.400 (W) x 650 (D) x 1.300 (H) mm

Power: AC 220V, 50 / 60Hz, 15A;

Weight: 80 kg

Other supplier products

	Rubber wheel abrasive wear tester	Rubber wheel abrasive wear tester-According to ASTM G65-04 standard, under certain test conditions, the use of sliding friction in the form of engi...
	Reciprocating Wear Tester	Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate t...
	Thermal Radiation Performance Tester	Thermal protective clothing and some fire-retardant properties of the material refers that human body carry out security protection who work under ...
	Foam Fatigue Tester	The Foam Fatigue Testing Machine is a single-station pneumatically driven testing machine. In its standard configuration, it applies a constant loa...
	Nonwovens liquid loss tester - Test Equipment	This fabric friction tester can measure the static and kinetic friction coefficients of non - woven fabrics. It can be used to test the slippage of...

All supplier products

Same products

	Air Intake Filter Test System	Seller: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Seller: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Seller: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Seller: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Seller: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...