Bundle wire and cable burning test machine
Standards
According to IEC60332-3-10:2000.and GA306.1-2007
Main components
Testing chamber, electric control system, air source, ignition source flew control system (propane gas and air compressed gas), steel elevator, Fire extinguishing devices, emissions purification equipment (user option).
Application
Apply to evaluate suppression ability of spread of fire for bundles installed wires and cables ,under specified conditions.
Technical parameters
1. shape (overall space) size: 2500mm(length)*3200mm(width)*4500mm(height)
2. material: heat transfer coefficient of 0.7W∙m-2∙K-1 thermal insulation, that is, coated 65mm thick mineral fiber stainless steel plate
3. air source: control the gas flow through the box air is (5000±500) L/min, the test process can stabilize the air flow rate. A spraying device that forcibly stops burning after the test is completed
4. steel ladder type: width 500mm standard steel ladder width 800mm wide steel ladder
5. Discharge purification device: the test box has a collection and washing smoke device that does not change the air flow through the test box
6. ignition source: including one or two belt type propane gas burner and its supporting flow meter and venturi mixer. The fire supply surface shall be drilled with 242 flat metal plates with a diameter of 1.32mm aperture, with a center distance of 3.2mm and staggered in three rows of 81. 80 and 81 holes, respectively, distributed within a nominal size of 257×4.5mm. In addition, a row of small holes are opened on each side of the spout plate, and these guide holes can keep the flame burning steadily.
a) Each burner is equipped with a rotameter to accurately control the propane and air inflow rate.
b) Under the reference conditions of 100kPa and 20℃， the airflow rate of the test:
Air (77.7±4.8) L/min Propane (13.5±0.5) L/min
Send product request
Other supplier products
 |
Low-Temperature Bending Resistance Tester | Application Cold Flexibility Testing (ISO 4674-2/ASTM D1790): Samples are bent 10.000–50.000 times at -40°C to simulate polar or alpine... |
 |
Electronic single fiber strength meter | Compliance Standards - GB/T14337 - GB/T9997 - GB/T13835.5 - GB/T21120 - ISO5079 - ISO11566 - ASTM D3822 - BS4029 Application Scope - Used... |
 |
Mask Synthetic Blood Penetration Tester | The Mask Synthetic Blood Penetration Tester is designed to evaluate the resistance of medical protective masks and other coated materials to penetr... |
 |
Electrostatic Decay Tester | The Electrostatic Decay Tester is professionally designed to evaluate the static electricity attenuation characteristics of textile and non-textile... |
 |
Textile formaldehyde content tester | Application This tester is widely used in: Textile manufacturing and processing factories for quality control. Garment production lines to ensur... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
