Room Corner Test Machine, ISO 9705. En 14390

• 

According to ISO 9705 of building materials fire prevention performance standards, this machine control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument, He-Ni laser smoke density measurement and control system, etc.

Entity room fire test methods for surface of the article use the same principle with the cone calorimeter and SBI test method that is based on the oxygen consumption. The method is to simulate the corner of the fire scene as a standard test conditions, and installation of a test sample entirely according to actual use, the test results apply only to specific sample installation, it is one of the most reliable standard test methods. In the corner fire test, in accordance with the requirements of ISO 9705. and the measured material mounted on the inner walls of the room (at the top is not installed), Using propane burners as a radiation source, the measurement of heat release rate, temperature, heat release, flashover time, CO2 /CO and other parameters, for which the most important is the heat release rate and the flashover time.

Standards

• ISO 9705: Large BOX test surface of the product

• ISO 13784-1: plywood building systems Reaction to fire test

• ASTM E 1537: Standard upholstered furniture flame test method

• ASTM E 603: Standard guidance corner combustion experiments

Main Features:

1. The test room is built by the density of 700kg / m³-A1 class fireproof material.

2. The internal dimensions of the room 3.6M X 2.4M X 2.4M

3. The gate size: 0.8M (W) X2.0M (H)

4. Sandbox burner with propane gas and equipped with emergency shut-off devices.

5. Automatic ignition system to automatically record experimental data;

6. Independently movable time to display units.

7. 10kV spark ignition, a cease-fire with safety devices. Fire extinguishing drainage system design.

9. Equipped with staircase for easy maintenance exhaust pipes.

Other supplier products

	Ozone Test Chamber	Ozone testing laboratories have wide applications in various fields, including but not limited to: Material aging testing: Used to evaluate the ag...
	Single wire and cable horizontal burner	Product Introduction: HT-DXSP touch screen control single wire and cable horizontal burner is suitable for determining the flame resistance of sin...
	Fabric Coolness Tester - lab instrument	It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am...
	Yarn length tester - lab instrument	Compliance Standards FZ/T 70001-2003. FZ/T 71004-2003 Scope of Application Determines loop length of various yarns and knitted loops. Verifies c...
	Automatic Long Filament Curl Shrinkage Tester	Automatic Long Filament Curl Shrinkage Tester The automatic long filament curl shrinkage tester is designed for measuring boiling water shrinkage ...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...