Needle burner tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard.
Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples (level 1) conforming to IEC 60584-2
The calibration device is capable of automatically measuring the time interval between 100 ° C and 700 ° C and calculating the mean value of the three measurements. The calibration device is also equipped with a digital-analog temperature output that can be used to measure the external time interval.
Standards
IEC60695-11-5. GB/T5169.5
Scope of application:
Needle flame testerused not only for low-voltage electrical appliances, power tools, machine tools, electrical instruments, household appliances, electrical, electronic equipment, lighting, electrical connections, accessories and other electrical and electronic equipment and components, components research, production and quality Departments, but also for insulating materials, engineering plastics or other solid combustible materials industry
Features:
1. completely independent of electricity, gas design, use safely
2. military-grade explosion-proof glass
3. the unique delay exhaust system, the machine can continuously run after the exhaust ventilation which can be preset 1 ~ 3min
4. box with high hardness stainless steel
Technical Parameters:
1. the equipment outside size: 1000mm wide × 650mm deep × 1300mm high
2. test background: black background
3. the burning time: 0-999.9s ± 0.1s adjustable (generally selected for the 30s)
4. burning time: 0-999.9s ± 0.1s, automatic recording, manual pause
5. the temperature test range: 0 ~ 1000 ℃
6. the combustion gas: 95% butane gas (can be bottled lighter gas)
7. the flame height: 12mm ± 1mm (with height measurement equipment)
8. the flame temperature requirements: from 100 ℃ ± 2 ℃ rose to 700 ℃ ± 3 ℃ time in 23.5 seconds ± 1 second
Send product request
Other supplier products
 |
Hybrid iii Dummy | The Mixed Type III Crash Test Dummy - Adult Male 50th Percentile is widely used in frontal collision tests to evaluate automotive safety restraint ... |
 |
4-station Leather Rubbing Color Fastness Tester manufacturer | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email：serving@qinsun-lab。com Applicable Standards The tester adheres to global c... |
 |
Textile Fabric Steam Shrinkage Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Testing Standards: ISO 3005:A standard method for determining dimensional changes... |
 |
ICI Pilling Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Product Information 1.Equipped with four pilling Boxes; 2.With the function of f... |
 |
Chemical Mechanical Polisher | The Chemical Mechanical Polisher is widely used in laboratory and pilot-scale environments for polishing process optimization and material behavior... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
