Fabric Static Stress Resistance Tester
Product Name
Fabric Static Stress Resistance Tester
Applicable Standards
DIN 53860 - 1: Inspection of textiles - Inspection of planar fabric sac-like protrusions - Part 1: Static stress bend tube test method
Application Scope
It is used for testing the elbow static stress deformation of textiles such as woven fabrics or knitted fabrics. The testing instrument includes an elbow fabric static stress resistance tester, an elbow fabric protrusion height measuring instrument, a sample preparation template, etc.
Product Features
1. The frame is made of high-quality aluminum alloy, which is relatively lightweight.
2. Equipped with LED lighting source, with high illuminance, clear imaging and easy identification.
3. Ball joint connection, with low sliding friction and smooth movement.
4. Hinged connection for easy clamping of samples.
5. The measuring arm is made of high-quality non-metallic materials, which is light and easy to operate.
Technical Parameters
1. Angle of the upper test arm relative to the vertical line: 10 degrees
2. Spring stiffness: 149N/M, meeting the standard requirement of 150N/M ± 30N/M
3. Wire diameter: 0.3mm
4. Diameter: 3mm
5. Length of the upper test arm: 250mm
6. Length of the lower test arm: 300mm
7. Connection method: Ball joint connection
8. Lighting source: LED with a power of 20W
9. Projection method: Optical imaging with a resolution of 1mm
10. Measuring arm: Hinged connection for easy clamping of samples
11. Dimensions:
- Static stress experiment part: 600mm×600mm×800mm
- Projection measurement part: 400×600×600mm
12. Power supply: AC220V 50Hz
Send product request
Other supplier products
 |
Foam IFD Tester | The IFD tester is a benchtop, low-cost foam indentation force-deflection (IFD) tester. This IFD tester can also perform indentation load-deflection... |
 |
Radiant heat drop tester | The tester is used for evaluating the combustion behavior of automotive interior components including dashboards, trim panels, door panels, seat fa... |
 |
Puncture Strength Tester | Introduction to the Device This device is a testing machine used to measure the "puncture strength" when a sample is penetrated by a test needle. A... |
 |
Smoke Density Chamber | The main principle is to measure smoke density in a particular space, cable or material produced under specific conditions of combustion or radiati... |
 |
Rubber hose outer coating wear testing machine | The Rubber Hose Outer Coating Wear Testing Machine is a precision laboratory and production testing instrument designed to evaluate the abrasion re... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
