Leather Rubbing Color Fastness Tester - Test Equipment
Introduction
This machine is suitable for all types of stain-resistant fur dry and wet rubbing fastness, and various types of fur products and fur leather goods and dual-use lint-free test.
Standards
IS0 11640 Leather-Tests for colour fastness-colour fastness to cycles of to and fro rubbing
SATRA PM 173 Colour fastness to rubbing-reciprocating method
QB/T 2537 Leather-Tests for colour fastness-colour fastness to cycles of to and fro rubbing
GB/T 20991 7.3 Determination of abrasion resistance of insole
EN ISo20344 7.3 Determination of abrasion resistance of insole
AS/NZS 2210.2 7.3 Determination of abrasion resistance of insole
ISO 17700 Method A To and fro square rubbing finger fastness testing Footwear-test methods for upper components and insocks-colour fastness to rubbing
DIN 4843 Safety footwear safety requirements testing
Application
IULTCS Rubbing Color Fastness Tester, designed to carry out a rub fastness test on the surface of leather to determine the amount of "marring"of the leather surface or the finish and to assess the amount of colour transferring from the sample to the rubbing pad under dry or wet conditions.
The unique design of Iultcs Rub Fastness Tester allows reliable and stable test result.
Impact appearance and construction design offers a good shape and convenient operation, also allows a long life time without repairing.
Equipped with an extension device so samples can be extended at a required rate.Two models of single and double test position are offered.
Send product request
Other supplier products
 |
fabric wet adhesion performance tester - Test Equipment | The tack - holding tester, also known as the tack - holding property tester, tack - holding force tester, or holding - power tester, is a device sp... |
 |
Needle Flame Tester - Test Equipment | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Oil mist separation efficiency test bench - Test Equipment | Standard GB/T 6165-2021 Technical parameters Measurement range (size) 0.18 – 40 µm Volume flow rate 1 – 25 Nm3/h,... |
 |
Rain Test Chamber | Product Information: This instrument can simulate rain horizontally spraying to the tested sample which is vertically fixed in the stainless steel... |
 |
Oil Filter Performance Tester - Test Equipment | Applicable standards DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration ... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
