Fabric Touch Tester - Test Equipment
Brief Introduction：
By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, textiles, non-woven, sanitary paper, leather and other sheet-like soft material.
At the same time, the use of different accessories, you can also test a sample of the elastic / viscoelastic / plasticity, bursting, compressibility, thickness and basis weight and other performance indicators
![image.png]( "image.png")
Product Description：
The new type of concrete works softness measuring method is as follows: The main components of the instruments are a rotor, a vibration sensor and other sensors used to collect additional data and control instrument functions.
For the measurement, the sample rests on the rotor, when the rotor starts to rotate to reach the final position.
Mutual contact between the rotor and the sample so that the sample vibrate. After the vibration sensor receives the vibration signal, which is transmitted to the analysis component.
Analysis component prepared good data transfer to the computer. Then, through a complex computer calculations of these data are processed.
Use a complex formula, the parameters measured by synchronizing further parameters and customer pre-entered (the maximum you can use 68 different parameters) to calculate the value of soft.
Other supplier products
|
|
Car seat component clearance test bench |
The Car Seat Component Clearance Test Bench is designed to accurately measure and evaluate the clearance, tolerance, and gap consistency of automot... |
|
|
VW-1 wire and cable burning tester |
VW-1 wire and cable burning tester is suitable for measuring the resistance of wire,
cable or rope to flame horizontal propagation and falling o... |
|
|
Low-Temperature Bending Resistance Tester manufacturer |
Applicable Standards
The tester adheres to international standards for material testing at low temperatures, including:
ISO 4674-2(Rubber- or pla... |
|
|
Oil mist separation efficiency test bench |
Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual con... |
|
|
Ink drying apparatus |
The working principle of the ink drying instrument is based on simulating the drying environment of the ink in the printing process, and measuring ... |
All supplier products
Same products
