Fiber Oil Extractor - Test Equipment

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

Rapid Grease Extraction Apparatus

Testing Standards

Edana method ERT 155

Applications:

Rapid Grease Extraction Apparatus is designed to determine the grease or finish content of wool or synthetic samples by solvent percolation and evaporation. Suitable for fiber, yarn or fabric. Available with 1. 2 or 3 extraction units.

Product Information:

The Rapid Grease Extraction Apparatus was developed specifically for obtaining the oil content of tops and similar materials sufficiently quickly for the results to be available at the time of processing.

The principle of extraction is percolation of a solvent through the wool sample in a simple metal tube. The extract, as it drips from the tube, is collected by a light aluminium tray held between two metal rings mounted on a temperature-controlled hot-plate.

Features:

1.The instrument consists of pedestal, extraction tub, weight, plunger, cotton wool plug, tray, and the hot-plate.

2.The tube should be positioned in the hole in the lower support member of the apparatus, and the plunger boss placed in the hole in the upper support member.

3.In use the plunger is placed through the boss and down into the tube. The weight is then located on top of the plunger.

Testing Method:

Before starting a series of tests, the hot-plate is allowed to warm up to a suitable temperature (set by the power regulator knob). The correct temperature has been obtained when the solvent evaporates from the dish almost as quickly as fresh solution filters through to replace it. This prevents flooding of the tray and losing oil to the brass ring.

The temperature must not be too high, however, or the solvent will evaporate violently as the drops of solution hit the hot tray.

Before each test a pre-weighed aluminium tray is placed on the hot-plate brass ring. The tray location ring is then placed on the tray to secure it and to maintain a good thermal contact with the lower ring. The bottom of the tray must not touch the hot-plate.

This test method is most suitable for extracting loose wool or combed slivers, but it may also be used for yarn. It is not suitable for fabric unless it is first disintegrated into yarn to facilitate uniform packing in the extraction tube.

Technical Parameters

1.Range of temperature: ambient temperature-250℃;

2.Loading mode: aggravate weights;

3.Timing range: 1-9999min;

4.Accuracy of temperature control: ±1℃;

5.Number of specimens: 3;

6.Extracting solvent: Petroleum ether, ether and dichloromethane;

7.Outside dimension: 170×170×380mm(L×W×H);

8.Weight: 4.4kg(9.7lb);

9.Power supply: AC220V, 720W;

10.Power dissipation >: 175W.

Product Display

Other supplier products

	Connector Air Tightness Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Connector Air Tightness Tester is a professional device used to evaluate the s...
	Swimming goggles sealing tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Swimming Goggles Sealing Tester is a specialized test instrument designed to e...
	walk in Salt Spray Test Chamber	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Large-Scale Composite Salt Spray Test Chamber is a professional environmental ...
	Metal Wire Repeated Bending Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending Tester is designed to evaluate the bending fatigue...
	Automobile Sealing Strip Wear Test Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com The TL52057 automotive sealing strip abrasion teste...

All supplier products

Same products

	Bone connector torque analyzer for manufacturers	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Bone Screws Torque Tester is a ...
	Torque - to - Failure Tester for Metal Bone - connecting Screws	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Torque-to-Failure Tester for Metal Bone-C...
	Bone Fixation Device Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com A Bone Screw Pull-out Tester is a special...
	Carton drop tester ASTM D5276	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Carton Drop Tester is design...
	Computer-controlled Explosion-proof Capillary Rheometer	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Computer-controlled Explosio...