Helmet UV Pretreatment Box Tester

The Helmet UV Pretreatment Box is designed to simulate ultraviolet (UV) exposure on safety helmets, replicating natural sunlight aging effects to evaluate long-term durability and safety performance. It provides a controlled and standardized environment for UV irradiation, ensuring that helmet materials undergo consistent preconditioning before subsequent testing. The equipment is widely used in helmet manufacturing quality control, safety compliance verification, and research laboratories.

Application

This tester has a broad range of applications in both laboratory testing and industrial quality assurance, including:

(1) Helmet Manufacturing: Pretreatment of industrial safety helmets, mining helmets, construction helmets, high-voltage insulating helmets, firefighting helmets, and arc flash helmets to simulate sunlight exposure before durability and performance tests.

(2) Material Research & Development: Testing engineering plastics, thermoplastics, and polymer composites used in helmet shells, visors, and internal supports for UV resistance and long-term stability.

(3) Laboratory Testing: Used in occupational safety and health labs, third-party testing institutions, and product certification labs to ensure compliance with national and international UV exposure standards.

(4) Special Applications: Pretreatment of sports helmets, cycling helmets, climbing helmets, or protective headgear in industries where UV exposure may affect material properties.

(5) Durability & Aging Studies: Enables simulation of long-term sunlight exposure to evaluate color stability, mechanical properties, and material degradation.

Specific products tested include:

Construction safety helmets

Firefighting helmets

High-voltage insulating helmets

Mining helmets

Engineering plastic helmet shells and visors

Arc flash protective helmets

Standards

The instrument meets both national and international standards, including:

(1) GB/T 2812-2006 – Safety helmet test method (China)

(2) GB/T 2811-2019 – Safety helmet (China)

(3) EN 397:2012+A1:2012 – Industrial safety helmets (Europe)

(4) EN 50365:2002 – Electrical insulating helmets for low-voltage installations (Europe)

(5) ANSI/ISEA Z89.1-2014 – Industrial head protection (USA)

(6) CSA Z94.1-15 – Industrial protective headwear (Canada)

(7) ISO 24450:2005 – Helmets for high-voltage electrical work (International)

(8) ASTM D4329-20 – Standard practice for exposure of plastics to UV and water (International)

(9) AATCC TM16 – Colorfastness to light (textiles and polymer surfaces)

(10) JIS T 8114 – Testing of helmets (Japan)

(11) BS EN 12470 – Helmets for head protection (UK)

(12) DIN 53436 – Plastics – UV exposure testing (Germany)

Features

(1) Standardized Pretreatment: Provides a controlled environment for UV irradiation according to relevant helmet testing standards.

(2) Simulates Natural Aging: Replicates long-term sunlight exposure effects on helmet materials.

(3) Essential for Durability Testing: Prepares helmets for subsequent performance tests, including electrical insulation, mechanical strength, and anti-static evaluation.

(4) Multiple Helmet Testing: Capable of pretreating up to 14 helmets simultaneously for high-throughput laboratories.

(5) Controllable Exposure Time: Timer range up to 999 hours for flexible preconditioning.

(6) High-Intensity UV Source: 450W high-pressure short pulse xenon lamp simulates the full spectrum of sunlight.

(7) Air-Cooled System: Maintains stable chamber temperature and prevents heat accumulation during prolonged UV exposure.

(8) Robust Laboratory Construction: Designed for durability and safe operation, minimizing operator exposure to UV radiation.

Technical Parameters

Parameter	Specification
UV Radiation Source	450W high-pressure short pulse xenon lamp
Cooling Method	Air-cooled
Timer Range	0–999 hours
Maximum Helmets Pretreated	14 units
Chamber Type	Enclosed UV irradiation chamber
Safety Feature	Operator protection against UV exposure
Construction	Laboratory-grade, corrosion-resistant materials

Other supplier products

	Blackboard Shaker	The Blackboard Shaker is a precision instrument designed for evaluating the appearance quality of yarns. It shakes yarns of specified density acros...
	vertical flame test chamber - lab instrument	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwear, fabrics, other textile materials or resilient ...
	Brooming Machine	It is applicable to garment, hats, hosiery,neckerchief, accessories, towels etc. Function and features The machine adopts simultaneous running ...
	Rubbing alcohol testing equipment	Theabrasion tester for mobilecomplies withUL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a ...
	Micro-Scale Abrasion Tester	The STD-TE 66 Micro-Scale Abrasion Tester is used for determining the wear coefficient of hard and soft coatings and monolithic materials by abrasi...

All supplier products

Same products

	Air Intake Filter Test System	Seller: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Seller: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Seller: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Seller: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Seller: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...