Film impact Tester
The Film Impact Tester (Gardner) is designed to evaluate the impact resistance of coatings and paint films. It determines the degree of damage such as cracking, chipping, or delamination after an impact, providing objective data for quality control, research, and product development. The instrument features a simple structure, user-friendly operation, and precise measurement capabilities, fully meeting the requirements of national and international standards.
Application
(1) Determining the impact resistance of paint films and coatings in laboratories.
(2) Evaluating coating flexibility and adhesion after impact.
(3) Assessing the degree of damage such as cracking, peeling, or indentation caused by impact.
(4) Quality control of coated products in automotive, electronics, construction, and other industries.
(5) Research and development of new coatings with enhanced impact strength.
(6) Ensuring compliance with national and international standards for coating impact resistance.
(7) Simulating real-world impact events in a controlled laboratory environment.
Standards
(1) GB/T 1732-2020 – Paints and varnishes – Determination of impact resistance.
(2) ASTM D2794 – Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact).
(3) ISO 6272 – Paints and varnishes – Determination of resistance to impact.
Features
(1) Novel design with a simple structure for ease of use.
(2) Adjustable drop height for controlled impact testing.
(3) Standardized weights and punches for repeatable results.
(4) Provides precise and objective measurement of coating impact resistance.
(5) Essential tool for quality control and R&D in the paint and coatings industry.
(6) Compact and robust, suitable for laboratory environments.
Parameters
| Parameter | Specification |
|---|---|
| Maximum impact height | 1000 mm |
| Weight range | 1000 g–1 g |
| Punch diameter | 8 mm |
| Instrument weight | 15 kg |
| Dimensions (L×W×H) | 200 × 200 × 1300 mm |
Send product request
Other supplier products
 |
Fat End Type of Thread EndSuction Machine | lt is applicable to clean up large-sizegarment, such as: surgical gown, robeetc.,thread end and fibre dust cutdown from carpet and rugs (no statice... |
 |
Building material flame retardancy test furnace | Technical parameters: Gas used: methane flow rate （35 ± 0.5）L/min, its purity is greater than 95%, air flow rate （17±0.2）L/min Spec... |
 |
Xenon Arc Exposure Apparatus | 1.The spectra of the xenon arc lamp and sunlight are highly convergent.Xenon arc exposure apparatusadopts quartz globe sealing and filtration techn... |
 |
Single-Flame Source Tester En ISO 11925-2 | This instrument is designed according to ISO 11925-2. it is used to test building material under conditions in the absence of external radiation to... |
 |
AATCC Viewing Board - Test Equipment | TheRating Observation Boardis an intelligent monitoring system designed for real-time evaluation and visualization of product quality metrics in in... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
