Blanket Flammability Test Machine
Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of bed blanket fabric and flame spreading performance of fabric surface.
The instrument is also suitable for the performance verification of new products developed, quality control of production departments, product performance verification of third-party testing institutions, and the measurement of material performance by laboratories and quality and technical supervision departments.
Standards
ASTM D4151:Standard Test Method for Flammability of Blanket
GB/T11049-2008:Burning behaviour of carpets - Tablet test at ambient temperature
BS 4790:Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
ISO 6925:Textile floor coverings - Burning behaviour - Tablet test at ambient temperature
BS 6307:Method for determination of the resistance to ignition of upholstered furniture (match flame equivalent test)
Structure
Flowmeter :Adjust the gas flow size.
Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe
Windscreen: the upper part of the windshield is provided with glass
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
Control panel :Power- power switch ;Start：Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
Reset :Timer reset /Fire tube reset.
Sample clamp and specimen holder :The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob.
Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward.
Send product request
Other supplier products
 |
Rubber hose outer coating wear testing machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Rubber Hose Outer Coating Wear Testing Machine is a precision laboratory and p... |
 |
NES 713 Navy Engineering Smoke Toxicity Test Chamber | The NES 713 Navy Engineering Smoke Toxicity Test Chamber is suitable for evaluating the combustion smoke toxicity of a wide range of materials, inc... |
 |
Oil mist separation efficiency test bench - Test Equipment | Standard GB/T 6165-2021 Technical parameters Measurement range (size) 0.18 – 40 µm Volume flow rate 1 – 25 Nm3/h,... |
 |
Textile Bonded Door Drench Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Textile Bonded Door Drench Tester is a specialized instrument for evaluating t... |
 |
Heavy-Duty Reciprocating Friction and Wear Testing Machine | The Heavy-Duty Reciprocating Friction and Wear Testing Machine is a high-performance tribological testing instrument designed to study friction and... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
