Flame Spread Index Tester
The Flame Spread Index Tester is designed to evaluate the flame propagation characteristics of wall and ceiling lining materials. You can measure the material’s flame spread index (FSI) by exposing samples to a controlled tubular burner with a heat output of 530 J/s and monitoring the flame development over time. This tester allows you to assess fire performance accurately according to international and national standards, providing critical data for building safety, material development, and regulatory compliance.
Standards
This tester conforms to the following international and national standards:
GB/T 8624‑2012 — Classification of burning behavior of building materials and products (Flame spread index basis)
GB/T 2406.2‑2009 — Plastics combustion test, vertical burning method
GB/T 2408‑2008 — Plastics combustion test, horizontal burning method
GB/T 27904‑2011 — Flame spread test for interior decoration materials
GB/T 16172‑2007 — Determination of heat release rate and total heat release (Cone calorimeter method)
ISO 5658‑2 — Determination of flame spread index, Part 2: Small flame spread test
ISO/TR 9705‑2 — Room corner flame spread test, Part 2: Material performance evaluation
ISO 5660‑2 — Heat release rate, smoke production, and mass loss, Part 2: Flame spread method
ISO 5660‑4 — Heat release and smoke testing for automotive interior materials
ASTM E162 — Surface flammability: smoke density and flame spread
ASTM E648 — Flame propagation of carpet materials
UL 94 — Plastic material flammability: vertical and horizontal burning tests
BS 6853:1999 — Railway vehicle material flame spread, smoke density, and toxicity evaluation
BS 476‑6:1989 + A1:2009 — Fire performance test of building materials, Part 6: Small flame spread method
Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 950 × 600 × 870 mm |
| Weight | 105.5 kg |
| Heating Devices | 2 × 1000 W quartz heaters providing thermal radiation |
| Burner Type | T-shaped tubular burner |
| Sample Holders | 3 types, stainless steel wrapped |
| Thermocouples | Continuously measure temperature difference between chimney and room |
| Power Output Control | Automatic adjustment according to test timeline |
| Data Acquisition | Computer-based, report generation |
Send product request
Other supplier products
 |
Seat Ingress/Egress Simulation Tester| Testing Equipment | The True Body Weight Ingress/Egress Tester is a specialized machine designed to evaluate either a complete automotive seating system or individual ... |
 |
Comprehensive Engine Oil Filter Test Bench - Test Equipment | Application This test bench is designed for comprehensive evaluation of engine oil filters, including spin-on filters and filter bypass valves. It... |
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive app... |
 |
Building Material Non-Combustibility Test Machine | This machine is designed and manfacture according to ISO 1182 .Furnace temperature can quickly reach temperature equilibrium into the test program;... |
 |
Multi-Functional Scratch Tester | Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, coating materi... |
