Windshield Washer Nozzle Fatigue Test MachineISO 6255，Automotive windshield washer system test equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Windshield Washer Nozzle Fatigue Test Machine is designed to evaluate the durability and performance of automotive nozzles, including windshield cleaning nozzles (WCS) and headlamp cleaning nozzles (HCS). The machine operates within a controlled environmental chamber, allowing you to simulate temperature and fluid conditions while performing long-term fatigue tests on multiple components simultaneously. Its integrated control and data acquisition system ensures precise monitoring and reliable results.

Application

You can use this machine to assess the functional reliability, spray performance, and environmental endurance of automotive nozzles. Typical applications include:

Fatigue testing of windshield washer nozzles (WCS) under cyclic operation.

Fatigue testing of headlamp cleaning nozzles (HCS) under repeated use.

Evaluating spray consistency and fluid distribution under various temperature conditions.

Simulating real-world environmental conditions to verify nozzle durability.

Commonly tested components with this machine:

Windshield washer nozzles (WCS)

Headlamp cleaning nozzles (HCS)

Fluid delivery connectors and fittings

Spray system assemblies

Standards

The machine complies with international and national automotive testing standards, including:

ISO 6255:1997 – Passenger car windscreen washer systems – Test methods

SAE J942:1999 – Performance requirements and test procedures for passenger car windscreen washing systems

GB 15085‑2013 – Performance requirements and test methods for automotive windshield wipers and washer systems

GB/T 23436‑2009 – Automotive windshield cleaning fluid testing specification

Parameters

Parameter	Details
Test Unit Dimensions	2030 × 2550 × 1600 mm (W × H × D)
Internal Test Unit Dimensions	1900 × 1150 × 1450 mm (W × H × D)
Rated Power	4 kW
Working Fluid	Water – Ethanol mixture
Allowable Environment Temperature (Test Unit)	MIN: -25 °C / MAX: 80 °C
Number of Test Components	20 (10 HCS / 10 WCS)

Features

Specifically developed for testing flammable or volatile liquids.

Consists of three independent components: test unit, control unit, and nitrogen generator.

Operates under Explosion-Proof Level 1 by inerting the test chamber with nitrogen.

Equipped with an explosion-proof suction device to remove flammable vapors and odors from the test chamber.

Test chamber and fluid temperature are adjustable according to the environmental conditions.

Visualization system displays all relevant operational statuses and real-time measurements.

PLC-based control unit enables precise operation and reliable data recording.

Accessories

Nitrogen generator for chamber inerting

Fluid supply lines and fittings

Temperature and pressure sensors

Data acquisition modules

Explosion-proof ventilation system

Test Procedures

Install nozzles or components to be tested inside the test chamber.

Connect the working fluid supply (water-ethanol mixture).

Set desired environmental temperature and operational cycles.

Start the test using the PLC-based control unit.

Monitor real-time system parameters including chamber temperature, fluid flow, and nozzle operation.

The machine records all data automatically for later analysis.

After the test, safely remove the components and review recorded fatigue performance.

Maintenance Information

Regularly inspect fluid lines and nozzles to prevent blockage or residue accumulation.

Check nitrogen generator and explosion-proof suction system for proper operation.

Calibrate temperature and pressure sensors periodically for accurate measurements.

Clean the test chamber to remove flammable vapors and fluid residue.

Verify PLC control software and data acquisition integrity before each test cycle.

Other supplier products

	Laminoplasty Plate System Fatigue Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, ...
	Building material burning tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Technical specifications: TheBuilding material burning testeris designed and manufactured ...
	Metal ring friction and wear testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Evaluate the wear resistance of the material: By simulating the friction process, real-tim...
	Adhesion evaluation equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The adhesion tester has extensive application value in multiple fields, inclu...
	Resistance to flame propagation tester,ECE R118 Annex 10	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This equipment is designed and manufactured according to ECE R118 Annex 10....

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...