Diesel Water Ash Sulfur Mixing Tester
Applications
1. In diesel quality control, homogenization of samples provides representative, homogeneous samples for the analysis of water, ash, and sulfur content;
2. Meets the requirements for diesel sample pretreatment in standards such as ISO 16332. ISO 4406. and GB 19147;
3. Improves the accuracy and repeatability of analytical results by using equipment such as Karl Fischer titrators (for water content determination), combustion analyzers (for ash content determination), and X-ray fluorescence spectrometers (for sulfur content determination);
4. Standardized pretreatment of diesel samples in a laboratory environment assists in fuel quality compliance testing.
Standards
ISO 16332:2018：Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
ISO 4406:2021：Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
GB 19147-2016：Automobile diesel fuels
Features
Based on the likely requirements for mixing diesel samples for water, ash, and sulfur analysis:
Robust stirring or mixing mechanism suitable for diesel fuel viscosity (e.g., powerful magnetic stirrer with strong magnetic coupling, overhead stirrer with appropriate impeller, or a laboratory shaker).
Sample vessel holders or platforms capable of securing sample containers of various sizes (e.g., bottles, beakers).
Variable speed control for the mixing mechanism to adjust the mixing intensity based on sample volume and viscosity.
Technical Parameters
| Technical Specifications | Details |
|---|---|
| Test Oil | GB19147 diesel or calibration oil |
| Pollution Level Adjustment Range | Grade 17-25 |
| Water Content Adjustment Range | 1500-20000 ppm |
| Sulfur Content Adjustment Range | 10-2000 ppm |
| Test Particle Size Range | 10μm-100μm |
| Test Water Content Range | 0.1μg-350 mg |
| Main Fuel Tank Capacity | 100+5L |
| Dust Filling Tank Capacity | 1±0.2L |
| Dust Filling Rate | 10 mg/min-5 g/min |
| Water Filling Tank Capacity | 1±0.2L |
| Water Filling Rate | 20-400 mL/min |
| Diesel Filling Tank | 10+2L |
| Diesel Filling Flow Rate | 0.5-4 L/min |
| Sulfur Filling Tank Capacity | 1±0.2L |
| Sulfur Filling Flow Rate | 0.005-1 L/min |
| Operating Temperature | 5-40℃ |
| On-Site Humidity | 10-90%RH |
| Power Supply | AC220V/50Hz |
| Air Supply | 7-9 bar |
| Equipment Power | 3 kW |
| Dimensions | 1500×800×1600 mm (L×W×H) |
| Weight | 600 kg |
Send product request
Other supplier products
 |
Test for Flammability of Materials | Thistester is developed base on thestandard AS1530.2. test for flammability of materials. The method is applied to the testing of a thin sheet or w... |
 |
Fabric Coolness Tester | The Fabric Coolness Tester is designed to evaluate the contact coolness sensation of textiles by measuring the contact coolness index (qmax, peak h... |
 |
Car seat component clearance test bench manufacturer | 1. Product Overview The Car Seat Component Clearance Test Bench is designed to accurately measure and evaluate the clearance, tolerance, and gap c... |
 |
Plastic ball indentation hardness tester | The Plastic Ball Indentation Hardness Tester is a precision instrument designed to evaluate the mechanical and hydraulic performance of plastic dra... |
 |
Blow-By Test Rig | Applications determination of oil content in blow-by on the engine test stand evaluation of oil mist separators on the engine test stand on-line... |
