Air Flow Velocity Distribution Test System，wind velocity distribution measurement system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Test System for the characterisation of the air flow velocity profile of components (e.g. tubes, filters).The air flow velocities between 1-40 m/s and turbulences in the outlet of flowed through units under test can be measured.
Through this, a good position for flow velocity measuring devices (for example MAFs) in flowed through parts (for example motor inlet filters) can be found easier, taking into consideration a range of air flow rates. The data created by the flow scanner can also be used to check models for flow simulation.
Applications
development of filter housings and air-ducting elements in general
comparison of models for flow simulation with measured values
Flow field uniformity analysis of air filters and filter assemblies;
Flow behavior evaluation of engine intake systems and intake filter housings;
Optimization of installation positions for air velocity and mass air flow sensors (e.g. MAF sensors);
R&D validation of ventilation equipment, air supply modules, and air handling units;
Comparison and verification of CFD simulation results with measured data;
Performance assessment of new air duct designs, guide vanes, and flow straightening structures.
Standards
The system can be used in accordance with the following standards and technical references:
(1) GB/T 1236 Industrial Fans – Performance Testing Methods
(2) GB/T 10178 Industrial Fans – Field Performance Testing
(3) ASHRAE Handbook – Fundamentals (Air Flow Measurement and Testing Sections)
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | m³/h | 20 … 900 |
| Air flow velocity | m/s | 1 … 40 |
| Test specimen dimensions | mm | max. 485 × 600 |
| Differential pressure of test specimen | Pa | – |
| System dimensions (W × H × D) | mm | 2500 × 2660 × 1300 |
| Weight | kg | approx. 550 |
Features
wide range of air flow rates 20 ... 900 m³/h (expendable up to 1200 m³/h)
up to 100 hPa of pressure drop over unit under test and periphery (connectors, hoses)
fast data acquisition (turbulences) and graphic display of data
Principle
Air is blown through the test specimen and the velocity field is measured on the downstream side with the aid of a hot-wire anemometer. This automatically scans a plane in the air outlet by means of a traversing device.
Accessories
hot wire anemometer set
picoscope (PC-oscilloscope)
Test Procedures
Mount the test specimen securely to the air flow system and ensure airtight connections;
Set the required air flow rate according to the test plan and component specifications;
Position the hot-wire anemometer downstream of the specimen outlet;
Start the automatic scanning process to measure the velocity field across the defined plane;
Record and process the measured velocity and turbulence data;
Analyze the flow distribution results and generate test reports or comparison data for simulations.
Maintenance Information
Regularly calibrate the hot-wire anemometer to maintain measurement accuracy;
Keep the scanning mechanism clean and free from dust or debris;
Inspect hoses, connectors, and seals to prevent leakage;
Avoid exposing the sensor to high temperatures, dust, or liquid droplets;
Store the system in a clean, dry environment when not in use.
Send product request
Other supplier products
 |
Footwear Comfort Testing Machine for Breathability & Thermal Insulation | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Complete Footwear Breathability and Thermal Insulation Test... |
 |
50th Percentile Male Side Impact Dummy | Whats/App: +86 156 1874 6768 Web: standard-groups.com The 50th Percentile Male Side Impact Dummy represents an average adult male in terms of bod... |
 |
Solar Panel Fracture Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The machine is widely applied in: Mechanical Impact Performance Evaluation: A... |
 |
Fiber Crimp Elasticity Measuring Device (for Fiber Crimp Elasticity Tester) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22... |
 |
Walk-in high and low temperature humidity test chamber manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The High and Low Temperature Humidity Test Chamber is a high-performance envi... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
