Automobile wire and wire bending testing machine
This testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles – Cables for conductor sets) andSAE J1128(Low-voltage battery cable specifications). By simulating repetitive bending stresses, it evaluates wire fatigue resistance under dynamic conditions, ensuring compliance with OEM specifications for in-vehicle wiring durability.
Product Features
Dynamic Swing Mechanism: 180° rotation with adjustable angles (1° increments) via digital control panel.
Variable Speed Control: 10–60 cycles/minute operation with real-time speed display and over-speed protection.
Modular Test Stations: Three channels with individual start/pause controls and LED status indicators.
Load Configuration: Four precision weights (2.5N, 3.75N, 5N, 7.5N) for simulating varying vibration/flexure stresses.
Diagnostic Capabilities: Built-in 24V test voltage output for continuity monitoring during bending cycles.
Robust Construction: 50KG steel frame with vibration-damping feet ensures stable operation at maximum load.
Technical Parameters
| Parameter | Specification |
|---|---|
| Swing Angle Range | 0°–180° (CW/CCW), adjustable in 1° increments |
| Operating Speed | 10–60 cycles/min (±1 cycle tolerance) |
| Cycle Counter | 1–999.999 counts (presettable with pause/resume) |
| Test Stations | 3 independent channels with quick-release fixtures |
| Applied Loads | 2.5N, 3.75N, 5N, 7.5N (interchangeable weights) |
| Fixture R-Angle Options | R3.75. R7.2. R9.6 (customizable per AWG/mm²) |
| Test Voltage | 24V DC (built-in supply) |
| Power Input | AC 220V ±10%, 50/60Hz (switchable to DC 24V/5A) |
| Machine Dimensions (W×D×H) | 600 × 450 × 750 mm |
| Net Weight | 50 kg |
Send product request
Other supplier products
 |
Vehicle Cabin Air Filter Tester| Testing Equipment | Applicable standards DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration ... |
 |
Universal Wear Tester | Standards ASTM Standards: D3514, D3885, D3886 (textile, coating, and plastic wear resistance) AATCC Standards: 119, 120 (fabric abrasion and pill... |
 |
Washer and Dryer - lab instrument | Scope of Application Used for the drying process in theTextile Testing - Home Laundering and Drying Proceduresstandard and other textile testing e... |
 |
zipper reciprocating fatigue testing machine | Zipper tester for bagsApplication The instrument is widely used to evaluate the durability and service life of zippers with various length in the ... |
 |
Curtain Combustion Tester | The curtain combustion tester is a special equipment for testing the combustion characteristics of fabrics such as curtains. Working principle: A... |
Same products
 |
Dynamic Shear Rheometer | Seller: Standard Groups | Dynamic Shear Rheometers are configured to meet the demands of everyday quality control testing o... |
 |
Noxious Gas Test Chamber | Seller: Standard Groups | Noxious gas tеst chambеrs play a crucial role in thе industrial sector by еnsuring thе longеvity ... |
 |
Chest Drainage Tester | Seller: Standard Groups | The Chest Drainage Tester is a precision instrument designed to evaluate the performance of dispo... |
 |
Plastic Smoke Density Tester | Seller: Standard Groups | You can use the F313 Plastic Smoke Density Tester in the following areas: Plastics industry: Eva... |
 |
Washing Fastness testing machine | Seller: Standard Groups | G228B washing fastness tester is used for washing, dry-clean color fastness testing. Electric tou... |
