Mechanical Scratch Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
Primary test purposes
Coating scratch resistance evaluation
Coating hardness assessment based on mechanical damage behavior
Determination of coating failure load
Detection of coating breakthrough on conductive substrates
Typical tested materials
Painted metal panels
Industrial coatings
Automotive coatings
Protective and functional coatings on metal substrates
Laboratory standard test panels
Standards
(1) GB/T 23989-2009 – Determination of scratch resistance of coatings
(2) GB/T 5210-2006 – Paints and varnishes – Pull-off adhesion test
(3) GB/T 1768-2006 – Determination of abrasion resistance of paint films
(4) ISO 1518-1 – Paints and varnishes – Scratch test – Part 1: Determination of scratch resistance
(5) ISO 20502 – Coating materials – Scratch test
(6) ASTM C1624 – Standard test method for adhesion and scratch resistance of ceramic and hard coatings
(7) DIN EN 1071-3 – Advanced technical ceramics – Mechanical properties of ceramic coatings – Part 3: Scratch testing
Parameters
| Parameter | Specification |
|---|---|
| Stylus moving speed | 35 mm/s |
| Maximum panel size | 100 × 150 × 1.6 mm |
| Maximum coating thickness | 0.3 mm |
| Applicable standard setting | ISO 1518-1 |
| Standard test load | 20 N |
| Power supply | 230 VAC, 50 Hz |
Features
Mechanical drive system enclosed by a protective cover for stable and safe operation.
Constant sliding speed of approximately 3–4 cm/s.
Rigid, well-balanced stylus arm that minimizes vibration and instability during scratching.
Equipped with a 1 mm tungsten carbide ball stylus fixed at 90° to the test panel.
Stylus can be easily removed for inspection or replacement.
Tungsten carbide tip provides long service life without frequent replacement.
Adjustable loading system with selectable weights from 100 g to 2 kg (0–20 N).
Optional additional weight up to 10 kg available for testing harder coatings.
Compatible with standard metal panels up to 150 × 100 mm and thickness up to 1.65 mm.
Optional transparent plastic safety cover to prevent accidental contact during operation.
Send product request
Other supplier products
 |
Molten Metal Penetration Resistance Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash)... |
 |
RE Type Side Impact Crash Dummy Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Male Side Impact Dummy (RE Type) is a high-fidelity side impact test dumm... |
 |
Xenon Arc Weatherometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight s... |
 |
Helmet Strap Tensile Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet strap tensile testing machine is designed to simulate tensile, impact, and durab... |
 |
Electrolyte Absorption Measurement Device | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Electrode Electrolyte Wetting Testing System is a high-precision instrument designed to... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
