Material friction stick slip testing machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Stick-Slip Tribological Test Stand is a laboratory testing system used to evaluate friction-induced stick-slip behavior and squeak noise risk between material pairs under controlled load and motion conditions.You can use this equipment to measure static friction force, dynamic friction force, coefficient of friction, maximum friction acceleration, and vibration frequency, providing quantitative data for tribological and NVH evaluation.
Standards
(1) VDA 230-206 – Test Method for Evaluation of Friction Noise
(2) BMW PR315 – Friction Noise Evaluation Specification
(3) BMW TL 9169300 – Technical Specification for Friction Properties
(4) VW / Audi / Porsche TL 52064. PV3981 – Friction Noise Testing Standards
(5) Ford L400 – Friction Noise Test Specification
(6) TPJLR-00-230 – Jaguar Land Rover Friction Noise and Tribology Standard
Parameters
| Item | Specification |
|---|---|
| Test Specimen Size | Customized according to customer requirement |
| Normal Load Range | 0–500 N, adjustable |
| Test Stroke | 0–50 mm, adjustable |
| Vibration Frequency | 0–200 Hz, adjustable |
| Static Friction Force Resolution | 0.01 N |
| Dynamic Friction Force Resolution | 0.01 N |
| Maximum Friction Acceleration Resolution | 0.01 m/s² |
| Coefficient of Friction Range | 0–2.0 |
| COF Accuracy | ±0.01 |
| Data Acquisition | Real-time display with curve output |
| Power Supply | 220 V / 50 Hz or 110 V / 60 Hz |
Accessories
(1) Adjustable specimen clamping fixtures
(2) High-precision force sensor
(3) High-sensitivity acceleration sensor
(4) Test specimens supplied by customer
(5) Control and data acquisition system (PC or PLC based)
(6) Safety enclosure
(7) Standard load weights
Test Procedures
(1) Clean and prepare the test specimens according to the applicable standard.
(2) Mount the specimens securely in the clamping fixtures.
(3) Set the required normal load, stroke, vibration frequency, and test duration.
(4) Configure data acquisition parameters and sampling rate.
(5) Start the test and apply friction motion under controlled conditions.
(6) Record friction force, coefficient of friction, acceleration, and vibration signals.
(7) Stop the test after completion and save all measurement data.
Maintenance Information
(1) Regularly inspect fixtures, sensors, and mechanical moving parts.
(2) Calibrate force and acceleration sensors at defined intervals.
(3) Keep sliding surfaces clean to prevent contamination-induced measurement errors.
(4) Check electrical connections and data acquisition stability.
(5) Store the equipment in a clean and controlled laboratory environment.
Send product request
Other supplier products
 |
Sliding Bearing Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sliding bearing fatigue testing machine is an important testing device, mainly used to ... |
 |
EN Standard Vacuum Cleaner Floor Brush Impact Tester Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards IEC 60312: Household and Similar Electrical Appliances – Vac... |
 |
Automatic Fabric Sample Cutting Machines | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Intelligent Sample Cutting Machine is a high-efficiency automated cutting... |
 |
Digital Continuous Load Scratch Test Equipment for Industrial Coatings | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Continuous Load Scratch Resistance Tester is designed to evaluate surface... |
 |
Battery Powder resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Powder Resistivity Meter is a precision testing system designed to measure electrical r... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
