Flexible shaft fatigue testing machine for vehicles
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This tester is applicable to a wide range of vehicle control cables and flexible shaft assemblies, including but not limited to:
(1) Automotive throttle cables
(2) Automotive clutch cables
(3) Automotive brake cables
(4) Automotive gear shift cables
(5) Automotive parking brake cables
(6) Motorcycle throttle cables
(7) Motorcycle clutch cables
(8) Motorcycle brake cables
(9) Bowden cables and flexible shaft assemblies
(10) Control cables for electric vehicles, light vehicles, and specialty vehicles
Suitable for: automotive manufacturers, motorcycle production facilities, cable/component manufacturers, third-party testing labs, and research institutions.
Standards
(1) QC/T 29101-92 — Automotive Cable Assemblies
(2) QC/T 228.10-1997 — Motorcycle and Moped Control Cable Test Method
(3) SAE J193 — Automotive Control Cable Reference Test Method
(4) ISO 6722 — Reference Principles for Cable and Component Durability Testing
Accessories
| Name | Description |
|---|---|
| Pulley Assembly | Guides the cable along the test path |
| Standard Weights | Apply initial load to the cable |
| Standard Springs | Alternate load between initial and maximum force |
| Cable Fixtures | Secure cables of various sizes |
| Magnetic-Electric Sensor | Detects test cycle count |
| Power Cable | Supplies electrical power |
| Fasteners | Bolts, nuts, and connection components |
Test Procedures
(1) Mount the cable specimen along the standardized test path.
(2) Install pulleys, weights, and springs securely.
(3) Set reciprocating stroke and frequency according to the applicable standard.
(4) Start the machine; the cable undergoes cyclic loading between initial and maximum forces.
(5) Monitor test progress; system records the number of cycles.
(6) Stop the test automatically when preset cycles are reached or if cable failure occurs.
(7) Record all relevant data including cycles, load, and cable condition to generate the test report.
Maintenance Information
(1) Regularly inspect pulleys, weights, springs, and cable fixtures for wear or loosening.
(2) Keep moving parts clean and properly lubricated.
(3) Verify motor and control system operation periodically.
(4) Replace magnetic sensors or components if cycle counting becomes inaccurate.
(5) Ensure power supply and grounding are stable and compliant.
Send product request
Other supplier products
 |
Smartphone Leak Detection Equipment ISO Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60529 – Degrees of protection (IP Code) (2) GB/T 42... |
 |
Geomembrane Fracture Resistance Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes ... |
 |
Gas Hazardous Characteristics Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This tester is used to test the flammable concentration range of gase... |
 |
Safety Footwear Compression Puncture meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test purpose Measure the compression resistance of the shoe head cover and the puncture re... |
 |
Protective Clothing Thermal Conductivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards: ISO 11092:2014 ASTM D1518-17 ASTM F1868 ISO 5085-1 ISO 9920 The pr... |
