Flame Spread Measurement System for Naval Applications

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

Building Industry

Flame spread testing of construction materials such as wall linings, ceilings, partitions, and insulation boards to verify compliance with fire safety requirements.

High-Speed Railway

Evaluation of interior materials used in high-speed trains, including seats, wall panels, ceilings, and decorative components, to ensure passenger safety.

Shipbuilding and Marine Engineering

Fire performance testing of bulkhead, ceiling, and deck materials used in ships and offshore structures.

Fire Safety Testing and Certification

Measurement of flame spread rate, ignition heat, and heat release for fire-resistant material development and safety certification.

Material Manufacturers

Performance evaluation of plastics, rubber, composite materials, and other products under radiant heat exposure to improve fire protection properties.

Standards

The apparatus complies with the following standards:

(1) GB/T 28752-2012 – Test Method for Lateral Flame Spread on Vertical Surfaces

(2) ISO 5658-2 – Reaction to Fire Tests — Spread of Flame — Part 2: Lateral Spread on Building Products in Vertical Configuration

(3) IMO Resolution A.653(16) – Surface Flammability of Bulkhead, Ceiling and Deck Finish Materials

(4)ASTM E1317

Parameters

Item	Specification
Methane Calibration Burner	1 kW and 3 kW flame output
Radiant Panel Size	480 mm × 280 mm
Ambient Temperature Range	10 °C to 35 °C
Calibration Gas	Methane
Combustion Gas	Propane or Methane
Power Supply	220 V, 10 A
Equipment Dimensions (Standard)	1100 mm × 1100 mm × 1700 mm
Equipment Dimensions (Optional)	1530 mm × 900 mm × 1650 mm
Equipment Weight	128 kg
Measured Parameters	Critical heat flux, ignition heat, total heat release

Accessories

(1) Methane gas cylinder (user supplied, purity ≥95%)

(2) Propane gas cylinder (user supplied)

(3) Mass flow controller set

(4) Water-cooling circulation unit

(5) Ceramic tube burner

(6) Thermocouple set

(7) Glass observation window with foot switch

(8) Video monitoring system

(9) Adjustment unit including rotameter

Other supplier products

	Gas Hazardous Characteristics Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This tester is used to test the flammable concentration range of gase...
	Chemical Mechanical Polishing Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is primarily intended for research and development applications. It s...
	Minimum Ignition Energy (MIE) – Dust Cloud Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be t...
	Infusion Pump Flow Rate Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Infusion Pump Flow Rate Tester is specifically designed for testing the flow rate of so...
	Wet Microbial Penetration Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The wet microbial penetration tester is mainly used to evaluate the barrier ability of medi...

All supplier products

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...