Flammability limits tester for gases and vapors
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The Flammability Limits Tester is suitable for:
Determining the upper and lower flammability limits of chemical gases and vapors.
Safety evaluation of industrial gas mixtures in laboratories and production facilities.
Research on combustible gas behavior under controlled temperature and pressure conditions.
Specific Testing Equipment:
Combustible gas sample containers
Gas mixing and vacuum control modules
Ignition control systems
Temperature and pressure monitoring devices
Standards
The system complies with the following national and international standards:
GB/T 21844-2008 – Standard Test Method for Flammability Limits of Compounds (Vapors and Gases) (China)
ASTM E918-19 – Standard Test Method for Flammability Limits of Chemicals at Elevated Temperatures and Pressures
ISO 10156 – Gases and Gas Mixtures – Determination of Flammability Limits
EN 1839 – Determination of Flammability Limits of Gaseous Fuels
Parameters
| Unit | Specification |
|---|---|
| Environmental Temperature | Adjustable: ambient ~ 200 °C, control accuracy ±1 °C |
| Sealed Container | Standard 8 L stainless steel vessel |
| High-Precision Pressure Sensor | Range: 0–200 kPa (absolute), for precise gas mixing |
| Conventional Pressure Sensor | Range: -0.1~3 MPa, for auxiliary container pressure monitoring |
| Auxiliary Gas Source | Air / Nitrogen / Test gas |
| Dimensions | 800 (W) × 600 (D) × 1300 (H) mm |
| Power Supply | AC 220 V, 50/60 Hz, 10 A |
| Weight | Approx. 150 kg |
Accessories
Stainless steel 8 L sealed container
Dedicated vacuum pump
Rubber stopper with pressure relief device
Gas mixing, vacuum, and pressure monitoring interfaces
Internal ignition device with interlock protection
Temperature sensor port
Observation window
Siemens PLC system with analog modules
7-inch HMI touchscreen
Data acquisition and storage modules
Send product request
Other supplier products
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrating to fabric for the liner material, feather or fi... |
 |
Scratch Resistance Tester KK-01，ISO 19252 abrasion and scratch protective material tester | The KK-01 Scratch Resistance Tester is designed to evaluate the scratch resistance of plastics, films, coatings, and automotive interior and exteri... |
 |
Automotive Windshield Washer Nozzle Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Windshield Washer Nozzle Fatigue Test Machine is designed to evaluate the durability an... |
 |
High temperature vacum friction & wear tester | The working principle of a high-temperature vacuum friction and wear testing machine is to simulate the friction and wear behavior of materials und... |
 |
Deval abrasion chamber | Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
