Chemical Protective Robotic Manikin
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The system consists of a mannequin and an upper body head for testing chemical and biological protective clothing and headgear. A mannequin is a full-size, articulated, carbon-composite body form that produces accurate anthropometric data. It is lightweight, chemically resistant and capable of performing a range of specified motion protocols. The only means of support were the hands, face and feet, which were tied to the foot boards.
The mannequin is mounted in an external drive frame. The foot drive frame supports external actuators and provides 10 axes of motion. Two lightweight actuators are installed inside the mannequin to generate sympathetic head movement. The system can perform a test sequence of up to six hours in a chemically harsh environment, consisting of any combination of 10 pre-programmed actions.
Also included in the mannequin system is an interchangeable carbon composite upper body head form, designed as a portable stand-alone system for smaller test chambers and temporary environmental analysis tents, which has the same exact dimensions as the mannequin and can be interchanged directly in the drive frame. This upper body form of the head is supported by the base of the head rather than the face. The system provides users with fully computer-controlled head joints that can be combined with arm movements driven by the frame.
Both the upper body and the mannequin have soft, chemical-resistant elastomer skin that covers the entire head, neck, wrists, and waist of the mannequin. This material was developed by i-bodi specifically for this application. In addition, according to the test requirements, low-cost, high-flexibility disposable silicone leather has been developed as an alternative. The house dosimeter holder in the form of a mannequin and upper body head collects the necessary data to evaluate the integrity of the test garment.
Application
This equipment is used for the following applications:
(1) Performance evaluation of chemical and biological protective suits
(2) Dynamic integrity testing of gas-tight and liquid-tight protective garments
(3) Sealing performance assessment at interfaces such as head–neck, wrists, and waist
(4) Testing of protective headgear and integrated respirator systems
(5) Research on material durability and degradation under mechanical motion
(6) Certification, verification, and compliance testing in controlled chambers or test tents
Standards
The system is designed to meet or reference the following standards and test specifications:
(1) ISO 13982-1 — Protective clothing against solid particulates
(2) ISO 16602 — Protective clothing for chemical exposure
(3) ISO 17491 — Chemical protective clothing test methods
(4) EN 943-1 / EN 943-2 — Gas-tight chemical protective suits
(5) ASTM F739 — Resistance of protective clothing materials to permeation
(6) ASTM F1001 — Chemical resistance evaluation of protective clothing
(7) NATO AEP-54 — Evaluation of chemical and biological protective equipment
(8) YY/T 0316-2016 — Medical protective equipment quality management reference
(9) GB/Z 42217-2022 — Chemical protective equipment test guidance
(10) GB/T 16294-2010 — Protective clothing performance testing
Product Advantages
Designed for Military CB Testing: Specifically developed and commissioned by leading defense R&D organizations for the rigorous testing of military CB protective gear.
High Chemical Resistance: Constructed with chemically resistant materials suitable for operation in harsh chemical environments.
Realistic Movement Simulation: Full-size, articulated body with 10 axes of motion and internal actuators can simulate a wide range of realistic infantry movements and activities.
Long Duration Testing: Capable of performing test sequences lasting up to six hours in challenging environments.
Versatile Configuration: Includes both a full-size mannequin and an interchangeable, portable upper body head form for different testing needs and chamber sizes.
Accurate Anthropometry: Produces accurate anthropometric data, ensuring protective gear fits and performs realistically on the manikin.
Integrated Data Collection: Features a dosimeter holder for collecting crucial data on garment integrity and agent penetration.
Sophisticated Control: Fully computer-controlled system allows for precise and repeatable execution of complex motion protocols.
Durable and Realistic Skin: Features custom-developed soft, chemical-resistant elastomer skin.
Technical Parameters
Motion System
| Item | Technical Parameter |
|---|---|
| Number of motion axes | 10 axes |
| Drive method | External motor-driven frame |
| Head motion | Internal lightweight actuators, synchronized |
| Motion mode | Programmable composite motion sequences |
| Continuous operation time | ≤ 6 h |
Support and Installation
| Item | Technical Parameter |
|---|---|
| Support points | Hands, face (manikin), feet |
| Foot fixation | Strapped foot boards |
| Head form support | Supported at head base |
| Interchangeability | Full manikin and head form interchangeable in same drive frame |
Surface and Skin Material
| Item | Technical Parameter |
|---|---|
| Skin material | Chemical-resistant elastomer |
| Coverage area | Head, neck, wrists, waist |
| Material property | Designed for CB exposure environments |
| Optional skin | Disposable silicone skin |
Sampling and Dosimetry
| Item | Technical Parameter |
|---|---|
| Dosimeter mounting | Integrated mounting locations |
| Sampling method | Passive sampling |
| Compatibility | Customer-specified dosimeters supported |
Send product request
Other supplier products
 |
Safety Helmets Impact and Penetration Resistance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Standard Helmet Visual Field Tester is a precision instrument designed to eval... |
 |
Mask Automatic Filter Performance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com The latest G506 mask automatic filter performance t... |
 |
HD2 Pneumatic Foam Fatigue Tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory t... |
 |
Floor Scrubber Air Performance Tester ISO 29463 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheFloor Scrubber Air Performance Testing Equipmentis designed for comprehensive e... |
 |
Safety Helmet Anti-static Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Safety Helmet Anti-static Tester is designed to evaluate the antistatic perfor... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
