Chemical Protective Clothing Testing Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This equipment is used for the following applications:
(1) Performance evaluation of chemical and biological protective suits
(2) Dynamic integrity testing of gas-tight and liquid-tight protective garments
(3) Sealing performance assessment at interfaces such as head–neck, wrists, and waist
(4) Testing of protective headgear and integrated respirator systems
(5) Research on material durability and degradation under mechanical motion
(6) Certification, verification, and compliance testing in controlled chambers or test tents
Standards
The system is designed to meet or reference the following standards and test specifications:
(1) ISO 13982-1 — Protective clothing against solid particulates
(2) ISO 16602 — Protective clothing for chemical exposure
(3) ISO 17491 — Chemical protective clothing test methods
(4) EN 943-1 / EN 943-2 — Gas-tight chemical protective suits
(5) ASTM F739 — Resistance of protective clothing materials to permeation
(6) ASTM F1001 — Chemical resistance evaluation of protective clothing
(7) NATO AEP-54 — Evaluation of chemical and biological protective equipment
(8) YY/T 0316-2016 — Medical protective equipment quality management reference
(9) GB/Z 42217-2022 — Chemical protective equipment test guidance
(10) GB/T 16294-2010 — Protective clothing performance testing
Technical Parameters
Motion System
| Item | Technical Parameter |
|---|---|
| Number of motion axes | 10 axes |
| Drive method | External motor-driven frame |
| Head motion | Internal lightweight actuators, synchronized |
| Motion mode | Programmable composite motion sequences |
| Continuous operation time | ≤ 6 h |
Support and Installation
| Item | Technical Parameter |
|---|---|
| Support points | Hands, face (manikin), feet |
| Foot fixation | Strapped foot boards |
| Head form support | Supported at head base |
| Interchangeability | Full manikin and head form interchangeable in same drive frame |
Surface and Skin Material
| Item | Technical Parameter |
|---|---|
| Skin material | Chemical-resistant elastomer |
| Coverage area | Head, neck, wrists, waist |
| Material property | Designed for CB exposure environments |
| Optional skin | Disposable silicone skin |
Sampling and Dosimetry
| Item | Technical Parameter |
|---|---|
| Dosimeter mounting | Integrated mounting locations |
| Sampling method | Passive sampling |
| Compatibility | Customer-specified dosimeters supported |
Mechanical and Detection Characteristics
| Item | Technical Parameter |
|---|---|
| Width range | 1–5 cm |
| Stretch range | 30%–70% |
| Detection linearity | 0.8–1.0 |
| Detection limit | 0.01%–0.1% |
| Fatigue life | ≥ 200.000 cycles |
Test Procedures
(1) Inspect the drive system, actuators, and control components
(2) Install the manikin or head form onto the drive frame
(3) Dress the test protective garment or headgear correctly
(4) Install dosimeters at specified locations
(5) Configure motion program and test duration via software
(6) Conduct dynamic exposure testing under controlled conditions
(7) Remove samples and dosimeters following safety procedures
Send product request
Other supplier products
 |
Fiber Composition Ratio Analyzer (for Fiber Blend Ratio Tester) | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Metal Corrosivity Tester | standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with... |
 |
Low-Load Wear Testing Machine | The Low-Load Wear Testing Machine is specifically designed to measure wear behavior under extremely small loads that were previously difficult to e... |
 |
Catheter Burst Pressure Tester | Applications The catheter burst pressure tester is a key device used to evaluate catheter performance in the medical field. Its main uses include:... |
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
