Automatic Double Plate Thermal Conductivity Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

Building Engineering: Used to evaluate and optimize the thermal performance of building materials to improve the insulation and heat-resistant properties of buildings.

Industrial Engineering: Used to monitor and control the thermal conductivity performance of industrial equipment to improve production efficiency and reduce energy consumption.

Environmental Monitoring: Used to monitor and evaluate the environmental impact of building materials, such as thermal pollution and thermal environment.

Scientific Research: Used to research and develop new materials to improve their thermal conductivity and application value.

The design and operation procedures of these devices ensure the accuracy and reliability of measurements, providing important technical support for the fields of materials science and engineering.

Standards

GB/T 10294-2008:Determination of Steady State Thermal Resistance and Related Properties of Thermal Insulation Materials

GB/T 3399-1982:Test method for thermal conductivity of plastics - Heat - resistant plate method

GB/T 10801.1-2002:Thermal insulation polystyrene foam

GB/T 10801.2-2002:Extruded polystyrene foam

GB/T 3139-2005:Test method for thermal conductivity of fiber reinforced plastics

GB/T 17794-2008:Flexible foam rubber and plastic insulation products

ASTM C518:Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

IS0 8301:Thermal Insulation — Determination of Steady-State Thermal Resistance and Related Properties — Heat Flow Meter Apparatus

DIN EN 12667:Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal Resistance

Technical Parameters

Items	Parameters
Specimen standard size	300mm × 300mm × H (5 ~ 40) mm
Specimen flatness	0.1mm
Thermal conductivity measurement display range	(0.001 ~ 2.000) W / (m • K)
Thermal conductivity measurement accuracy	± 3%
Thermal conductivity measurement Repeatability	± 1%
Temperature resolution	0.01 ℃
Temperature control accuracy	0.05 ℃

Different types of thermal conductivity tester temperature measurement range	Model	Cold plate temperature control interface ℃	Hot plate temperature control range ℃
	IMDRY3001-I	Room temperature - 95 ℃	Room temperature - 100 ℃
	IMDRY3001-Ⅱ	-℃ -5 ℃ - 95 ℃	15 ℃ - 95 ℃
	IMDRY3001-Ⅲ	-10 ℃ - 95 ℃	10 ℃ - 95 ℃
	IMDRY3001-IV	-15 ℃ - 95 ℃	5 ℃ - 95 ℃
	IMDRY3001-V	-20 ° C - 95 ° C	0 ° C - 95 ° C
	IMDRY3001-Ⅵ	-30 ℃ -95 ℃	-10 ℃ -95 ℃
	IMDRY3001-VII	-40 ℃- 95 ℃	-20 ℃ - 95 ℃
Power supply	AC 220V ± 10%, 2.5KW
Specimen thickness	Standard 25mm, range (5 ~ 40) mm
Specimen thermal resistance requirements	the thermal resistance of the specimen should not be less than 0.1 (m2 • K) / W, and should meet the thickness of the standard thickness Requirements; if the lower limit of thermal resistance of the specimen is as low as 0.02 (m2 • K) / W, the accuracy does not necessarily meet the requirements.
Clamping force	No more than 2.5kPa

Test Procedures

First: Prepare the accessories and test samples;

Open the instrument's test chamber;

Place the sample inside the chamber;

Close and lock the test chamber lid;

Measure the sample thickness using a depth gauge;

Open the positioning rod on the side of the chamber and flip it over;

Release the positioning rod;

Place another sample inside this chamber (the instrument has two identical heating units);

Turn on the low-temperature bath and power switch;

Pour in a certain amount of water;

Turn on the instrument and access the LCD screen operating interface;

Set the hot plate temperature, sample thickness, preheating time, and test time, etc.;

Click "Start";

The system forms a thermal cycle, and the sample is tested;

When the set time is reached, the instrument automatically stops. Open the chamber and remove the sample;

The test is complete. Turn off the instrument;

Analyze and compare the test data to evaluate the material's thermal conductivity.

Other supplier products

	Stick Slip Test Stand for Material Combinations(G-SSP)，Stick-slip behavior testing equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Stick-Slip Tribological Test Stand is a laboratory testing system used to evaluate fric...
	Safety Helmets Wearing Stability Tester	Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ...
	Thin Film Pendulum Impact Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Uses of the Film Pendulum Impact Tester The film pendulum impact tester is mainly use...
	Battery Isothermal Heat Meter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Battery Isothermal Calorimeter is a professional instrument developed ...
	Particle Strength Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D4179: Standard Test Method for Single-Pellet Pressure Resistance of Catal...

All supplier products

Same products

	Metal Ring-and-Block Friction and Wear Tester	Seller: Standard Groups	This friction and wear tester is designed and manufactured in accordance with the national standa...
	Sliding Bearing Fatigue Testing Machine	Seller: Standard Groups	The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...
	Sliding bearing PV friction testing machine	Seller: Standard Groups	The sliding bearing PV friction testing machine is primarily used to evaluate the friction and we...
	High temperature vacum friction & wear tester	Seller: Standard Groups	High temperature vacuum friction and wear testing machine is mainly used to study the friction an...
	Dry Sand Rubber Wheel Wear Tester	Seller: Standard Groups	Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of ...