Thrust Washer Friction Testing Machine

• 

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

The thrust washer friction testing machine is mainly used to simulate the frictional contact of materials under specific working conditions and to quantify the wear resistance and friction coefficient of materials.

Application

The end-face rotary friction and wear testing machine is mainly used to evaluate the wear resistance and tribological behavior of materials under rotating friction conditions. By simulating the actual working conditions of the material in the process of rotating friction, the testing machine can measure key parameters such as friction coefficient, wear amount and wear rate of the material, and then evaluate the wear resistance of the material quantitatively. This is of great significance for material research and development, product design, quality control and other fields.

Specifically, the main uses of end-rotating friction loss testing machines include:

Material tribological performance evaluation: By measuring the friction coefficient, wear amount and other parameters of the material, the tribological performance of the material is evaluated, which provides a basis for the selection and design of the material.

Lubricant performance evaluation: In the process of rotary friction, the use of lubricants has an important impact on the friction and wear properties of materials. The test machine can be used to evaluate the lubrication performance of lubricants under rotating friction conditions.

It provides reference for the selection and use of lubricants.

Durability test: For products that need to withstand rotating friction loads, such as mechanical seals, bearings, etc., the tester can be used to perform durability tests to assess the service life and reliability of the product.

Standards

When the end face rotary friction and wear testing machine is tested, it is usually necessary to follow certain standards and specifications. Here are some common applicable standards:

GB/T 12583-98: This standard specifies the test method of end-face rotary friction and wear testing machine, including the preparation of samples, the selection of test conditions, the recording and processing of test results, etc.

ASTM D： This is a standard developed by the American Society for Materials and Testing (ASTM) for the evaluation of thrust ring friction and wear performance test method. Although the standard is mainly aimed at thrust rings, the test methods and principles in it also have a certain reference value for the end face rotation friction and wear test.

Other industry or enterprise standards: In addition to the general standards mentioned above, different industries or enterprises may have developed specific test standards that may have specific requirements for specific material types, test conditions, or treatment of test results.

When conducting the test, it should be ensured that the selected standard is consistent with the test purpose and requirements, and the test methods and steps specified in the standard are strictly operated. At the same time, it is also necessary to pay attention to the calibration and maintenance of the testing machine to ensure the accuracy and reliability of the test results.

Feature

Versatility: Applicable to various friction types, including point contact, line contact, and surface contact.

High Precision: Employs a high-precision geared motor and sensors, supporting real-time load measurement.

Automation: The equipment features automated operation and supports one-click parameter setting.

Multiple Types: Available in various types based on friction method and friction pair differences, including four-ball, ring-block, high-temperature, and vacuum types.

Environmental Simulation: Some models can be expanded to accommodate different friction pair types, adapting to rolling, sliding, or combined motions, and feature high-temperature environment simulation capabilities.

Parameters

Other supplier products

	Cross scratch tester - Test Equipment	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards Automotive Standards: PV 3952. Ford BN 108-03. BMW 0180. DAF KEUR 00824...
	Water-cooled Xenon Lamp Aging Test Chamber - lab instrument	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Introduction： SI4000Xenon Arc Weather Ometer utili...
	Flexometer / Bally Leather Flexing Tester | Testing Equipment	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Applicable Standards The tester adheres to global standards for leather physical ...
	Shoe Sole Bending Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Footwear Manufacturing: Predicts degumming, cra...
	Slip Resistance Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Slip Resistance Tester is designed to evaluate the anti-slip performance of fo...

Same products

	Damp Freeze and Thermal Cycling Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ...
	Alternative to BBA steady state solar simulator tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S...
	Alternative to PV Hail Impact Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine...
	Solar Panel Insulation Resistance Test Chamber	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ...
	90-Degree Peel Tester for PV Backsheets	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e...