Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber is a high-end testing device capable of simulating complex environmental conditions. It is particularly well-suited for reliability verification in fields such as aerospace, aviation, and automotive electronics. By superimposing temperature-humidity cycles with vibration stress, it rapidly exposes potential defects in products during transportation or use.
Standards
JJF 1101 Calibration Specification for Temperature and Humidity of Environmental Test Equipment
GB/T 5170 Inspection Methods for Environmental Test Equipment for Electrical and Electronic Products
Features
ombined temperature, humidity, and vibration testing to simulate real-world multi-stress environments
High-performance transparent wave door with excellent X-band transmission efficiency
Integrated absorbing wave materials to minimize electromagnetic reflection and standing wave interference
Wide temperature and humidity operating range suitable for extreme environmental testing
High thermal load capacity to support powered test samples during operation
Stable structural design ensuring long-term flatness and mechanical reliability
Parameters
| Category | Item | Specifications |
|---|---|---|
| Basic Specifications | Nominal Inner Volume | 9.5 m³ |
| Inner Chamber Dimensions | 2700mm × 1800mm × 1950mm (Depth × Width × Height) | |
| Test Environment Conditions | Ambient temperature: 25°C, relative humidity: ≤85% RH, cold water temperature: ≤28°C | |
| Temperature Performance | Temperature Range | -70°C ~ +100°C |
| Temperature Fluctuation | ≤±0.5°C | |
| Temperature Deviation | ≤±2°C | |
| Temperature Uniformity | ≤2°C | |
| Temperature Ramp Rate | - Heating: ≥10°C/min (equivalent load 1000kg, electric heating power 8kW, average across the whole range; ≥10°C/min from room temperature to -55°C, ≥10°C/min from -55°C to 70°C)- In the range of -55°C ~ +85°C, the chamber can withstand an internal heat load of 8000W- In the range of -55°C ~ +85°C, the chamber can withstand an internal heat load of 3500W and an internal cooling air supply of 100kg/h (air temperature: 2~35°C, dew point temperature: ≤40°C) | |
| Humidity Performance | Humidity Range | 35% RH ~ 98% RH (adjustable within -20°C ~ 70°C) |
| Humidification Method | Humidification via hot air passing through the test piece; alternating temperature and humidity (typical value: 30°C/60°C, RH95%, temperature change rate ≥85%); constant temperature and humidity (typical value: 35°C, 90% ~ 98%) | |
| Humidity Deviation | ≤±3% RH (when humidity >75% RH); ≤±5% RH (when humidity ≤75% RH) | |
| Chamber Front Door | Door Configuration | Hermetic door with transparent viewport- Temperature resistance: -65°C ~ +105°C- Humidity resistance: 25% ~ 98% RHFunctional performance:1) Working frequency: X-band2) Temperature resistance range: -65°C ~ +105°C3) Humidity resistance range: 25% ~ 98% RH4) Wave transmission rate: >95%5) Standing wave ratio influence: <2%6) Power resistance: 10W/cm²7) Flatness: |
| Chamber Front End | Absorber Material (on Hermetic Door) | - Wave transmission rate (X-band): >95% (on left, right, and upper sides)- Power resistance: 10W/cm²- Total mass loss (TWC): ≤0.6%- Volatile condensable material (CVCM): ≤ |
Send product request
Other supplier products
 |
PV Light Induced Degradation (LID) Testing Chamber | Get a quote： Web: qinsun-lab.com Email：info@qinsun-lab。com The Light Decay Test Chamber is designed as an indoor exposure system, primarily used... |
 |
EV Battery Vibration and Crash Test Dummy | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The EV Battery Vibration and Crash Test Dummy is a seated anthropomorphic test dev... |
 |
Automotive HVAC Manikin | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automotive HVAC Manikin complies with the following international standards: ... |
 |
Film impact tester ASTM D2794 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The film impact testing machine, through the hemispherical punch at a certain spee... |
 |
Blanket Flammability Test Machine - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Introduction Bed Blanket Flammability Tester is used to detect the flame retardan... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
