AI-powered spencer impact tester instrument
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM D3420:Standard Test Method for Flexural Properties of Plastics
ASTM D256:Standard Test Method for Izod Impact Strength of Plastics and Reinforced Plastics
ASTM D4812:Standard Test Method for Tensile Properties of Thermoplastic Films and Sheeting
ASTM D6110:Standard Test Method for Tensile Properties of Rubber and Elastomers (Dumbbell Shapes)
ISO 180:Plastics — Determination of Izod impact strength
ISO 179:Plastics — Determination of Charpy impact strength
ISO 8256:Plastics — Cellular plastics — Determination of tensile properties
ISO 7628:Fibre-reinforced plastics — Determination of flexural properties
ISO 9854:Textiles — Determination of tensile properties — Part 1: Breaking force and elongation at break
DIN 53453:Kunststoffe — Bestimmung der Schlagzähigkeit (Charpy-Verfahren)
DIN 53753:Kunststoffe — Bestimmung der Biegeeigenschaften
Features
1. Multi-Energy Range and High-Precision Testing
The equipment supports three adjustable impact energy levels: 1J, 2J, and 3J, with a resolution up to 0.001J, meeting the testing needs of flexible packaging materials ranging from thin to thick.
Punch sizes are available in Φ12.7mm, Φ19mm, and Φ25.4mm, while clamp diameters are compatible with Φ60mm and Φ89mm, accommodating samples of varying thicknesses and structures.
2. Constant Impact Velocity and Pneumatic System
The impact velocity is constant at 2.5m/s, ensuring repeatability of test results.
The pneumatic clamping and pendulum release system effectively reduces human error and improves test stability.
3. Intelligent Data Management
Equipped with a microcomputer control system, it supports parameter setting, automatic data statistics, and visualized result display.
Compatible with the Lystem™ laboratory data sharing system, enabling one-click generation and unified management of test reports.
Technical Parameters
| Technical Parameter | Specification |
|---|---|
| Applications | Impact Testing, Sample Testing, Strength Testing |
| Materials | Aluminum, Composites |
| Weight | 110 kg |
| Dimensions | 630×500×760 mm (W×D×H) |
| Power | 110-240VAC, 50-60hz |
| Display | 160 x 128 dots graphic LCD module with alphanumeric keypad |
Accessoriess
Izod Vice
Charpy Rest
Tension Impact Rest (Specimen in bed method)
Puncture Impact Fixture
Pipe Rest
Component fixture to customer requirements
Variable weight impact hammers up to 50 Joules
Thermal printer
Full safety enclosure
Low-temperature chamber
Test Procedures
1. Environmental Condition Control
Samples must be pretreated for at least 4 hours in an environment with a temperature of 23±2℃ and humidity of 45%～55% to avoid the influence of temperature and humidity on material properties (refer to GB/T 8809 and ISO standards).
2. Sample Preparation and Installation
Samples should be uniformly 100mm×100mm in size, with no wrinkles, bubbles, or damage on the surface.
Select the punch size according to the material characteristics (e.g., Φ12.7mm for thin films, Φ25.4mm for thick composite films) and match the corresponding fixture.
3. Equipment Parameter Calibration
Before testing, the initial angle of the pendulum (90°), impact velocity (2.5m/s), and energy zero point must be calibrated to ensure compliance with standards such as ASTM D3420.
Verify the equipment accuracy using standard samples to avoid errors caused by mechanical wear or sensor drift.
4. Data Acquisition and Analysis
Record the energy consumed by the punch during the impact process and analyze the material deformation characteristics in conjunction with the stress-strain curve.
Compare the material to standard thresholds (e.g., the impact resistance of food packaging composite films should be ≥2J) to assess whether the material meets the application requirements.
Send product request
Other supplier products
 |
Textile Far - Infrared Radiation Heating Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Far Infrared Radiation Temperature Rise Tester is used for various te... |
 |
Circular Sample Cutter Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Circular Sample Cutter Tester is a manual precision instrument designed to cut standard... |
 |
Vacuum leak tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications 1. Automotive Industry In automobile manufacturing, sealing performance is d... |
 |
Helmet Strap Tensile Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet strap tensile testing machine is designed to simulate tensile, impact, and durab... |
 |
Manual Air Filter Performance Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 14295-2008 – High-efficiency air filters (2) GB/T 13554-2020 &nd... |
