Helmets Vertical SpacingInfrared - positioning Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The helmet vertical spacing infrared positioning tester is a specialized instrument used to measure the vertical spacing and wearing height of safety helmets. It conforms to the GB/T 2812-2006 "Safety Helmet Test Methods" standard, and some models are compatible with the updated GB/T 2812-2024 standard.
Application
This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets.
Standard
(1)GB/T 2812-2006:Test method of safety helmet
(2)GB 2811-2019:Head protection—Safety helmets
(3)EN 397:Protective helmets for industry
Features
(1)Digital display: Uses a digital display scale for intuitive readings and to avoid human error.
Modular design: Supports the replacement of different head forms, adapting to various safety helmet sizes.
(2)Efficient and convenient: Automated measurement process improves testing efficiency.
(3)Compliant with standards: Strictly adheres to domestic and international safety helmet testing standards.
Parameters
| Technical Parameter | Description |
|---|---|
| Digital height gauge | Can display height in real - time, with a measuring range of 0 - 500mm |
| Positioning method | Adopts infrared positioning |
| Sample preparation for measurement | First, wear the test sample on the head mold specified by the standard according to standard requirements, and adjust it so that the heights on both sides of the hat hoop are consistent |
| Wearing height measurement | Measure the vertical distance from the lowest point of the bottom edge of the hat hoop on the side of the sample to the top of the head mold as the wearing height, record the measured value with an accuracy of 1mm |
| Measurement of X1 | Measure the vertical distance from the position of the point on the edge of the minor axis of the helmet shell relative to the head mold to the top of the helmet shell as X1 |
| Sample re - placement for X2 measurement | Remove the wearing system and cushioning liners, place the sample on the head mold again, and ensure that the posture of the helmet shell is the same as before removal |
| Measurement of X2 | Measure the vertical distance between the same points as X2 |
Send product request
Other supplier products
 |
Rubber Mechanical Properties Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Rubber Sleeve Rebound Tester is designed to comply with the following standa... |
 |
Flooring Radiant Panel Test Apparatus EN ISO 9239-1 | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Flooring Radiant Panel Test Apparatus is used to tester a variety of flooring materials... |
 |
Konan Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods... |
 |
Automatic Feather And Down Filling Power Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Filling power is one of the most important indicators of down feathers and is... |
 |
Cabin Air Filter Test System（Gas Adsorption），ISO 11155 Cabin Air Filter Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Filter Test System for gas adsorption/desorption of air filters for passenger compartme... |
