Solid Auto - ignition Point Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - side - length cubic wire mesh and increasing the temperature. It complies with standards such as GB/T 21756 - 2008 *Determination of the Relative Self - Ignition Temperature of Solid Substances in Chemical Products for Industrial Use* and NF T20 - 036.
Applications
This testing instrument provides data on the spontaneous combustion of solid products induced by high temperatures, thereby determining the spontaneous combustion properties of solid chemical products. The instrument is not suitable for explosive products, products that spontaneously combust at room temperature or in air, or products that melt under these experimental conditions. This instrument supports two testing modes: "Standard Test" and "Self-Test Mode." The "Standard Test" is used to determine the spontaneous combustion properties of solid substances, while the "Self-Test Mode" is used to calibrate the temperature sensor, ensuring the reliability of the test accuracy. This instrument meets all requirements for solid spontaneous combustion point testing and features automatic heating and temperature control functions, greatly facilitating the production and transportation supervision of solid substances.
Standards
It meets the requirements of GB/T 21756-2008 "Determination of Relative Autoignition Temperature of Solid Substances for Industrial Use", French National Standard NFT "Determination of Relative Autoignition Temperature of Solid Solids for Industrial Use", and NY/T1860 "Experimental Guidelines for the Determination of Physicochemical Properties of Pesticides" Part 24: Relative Autoignition Temperature of Solids.
Features
(1)It adopts an embedded processor and the Windows CE operating system.
(2)With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.
(3)It supports two working modes, the "standard mode" and the "custom mode" (during the custom experiment, it can save the exothermic peak value in real - time, etc.), taking into account both the standardization and flexibility of the test.
(4) It integrates high - temperature heat - insulation technology, temperature control, and precise detection technology.
(5) It uses an electrically heated muffle furnace with natural air - circulation convection to ensure uniform heating of the samples.
(6) The furnace cavity is made of heat - insulating vacuum ceramic fiber, which has a good heat - insulation effect.
7) The cubic wire mesh is hung at the bottom of the furnace cover, making it safe and convenient to place samples.
(8)It realizes automatic heating control, temperature control, and combustion detection.
(9)A cleaning rod is provided for cleaning the inner cavity's central through - hole.
(10)A debris tray is provided to collect samples falling from the wire mesh and residual samples cleaned out by the rod.
(11)A cooling bracket is provided to place the assembled furnace cover on it for cooling after the test.
(12)It uses a thermocouple sensor to quickly and accurately respond to temperature changes.
(13)It displays the time - temperature curve in real - time, and the original data can be viewed.
(14)The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
Technical Parameters
|
Working Environment |
(5～40)℃, <85%RH |
|
Test Objects |
Solid |
|
Temperature Control Range |
Room temperature～650℃ |
|
Standard Rise Rate |
0.5 ℃/min |
|
Customized Rise Rate |
(0.1～3.0)℃/min |
|
Temperature Measurement Range |
(0～800)℃ |
|
Temperature Measurement Resolution |
0.1 ℃ |
|
Temperature Measurement Accuracy |
±2.5 ℃ below 300 ℃ |
|
Heating Chamber Capacity |
±(0.75% of the reading) above 300 ℃ |
|
Timing Range |
2L |
|
Mesh Cage Size |
(0～96)h |
Send product request
Other supplier products
 |
Laboratory Drum Reciprocating Wear Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM G133 (Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding ... |
 |
Bus Seat Durability Testing Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bus Seat Tester is designed to evaluate the durability, strength, and fat... |
 |
Manikin Flame Engulfment Test Apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Manikin Flame Engulfment Test Apparatus conforms to gbt23467-2009, iso1... |
 |
SI80 Carbon Arc Aging Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Material Science: Accelerated aging tests for polymers, coatings, and textile... |
 |
Aluminum Tube Durability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The main purpose of the ductility tester for aluminum tubes is to evaluate th... |
