Bone Plate Four-Point Bending Fatigue Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Bone Plate Four-Point Bending Fatigue Testing Machine is a specialized device used to evaluate the fatigue performance and mechanical strength of orthopedic bone plates. It applies cyclic four-point bending loads to simulate physiological conditions, allowing assessment of the plate’s durability, bending strength, and failure characteristics under repeated stress.
Standards
(1)YY/T 1503
(2)ASTM F382
These standards specify the testing methods for the bending fatigue performance of metallic bone plates. They provide evaluation methods for different designs of bone plates. Fatigue tests are conducted under cyclic loading at a frequency of 5 Hz, with R = 0.1. for 1 million cycles or until specimen failure.
The M series electromagnetic testing system provides precise sinusoidal load control and offers comprehensive test fixtures (different sizes, contoured rollers, etc.) to accommodate specimens of various dimensions. The system also provides accurate and effective testing procedures (SOPs) to support mechanical performance analysis of metal bone plates or comparison of different bone plate designs.
Application
The Bone Plate Four-Point Bending Fatigue Testing Machine is designed to evaluate the mechanical durability and structural performance of orthopedic bone plates under repeated bending loads. Typical applications include:
Orthopedic implant testing: Assess bending strength, stiffness, and fatigue life of bone plates.
Quality control: Ensure consistent mechanical performance of bone plates during production.
Research and development: Optimize design, material, and geometry of bone plates for enhanced fatigue resistance.
Standards compliance: Perform tests according to ISO 9585. ASTM F382. and other relevant international guidelines.
This machine helps verify that bone plates can withstand cyclic bending stresses encountered in clinical use.
Product Features
Next-generation fatigue testing system driven by a large electromagnetic motor.
Direct-drive electromagnetic motor ensures stable operation, high repeatability, and precise control of force and displacement.
Built-in electromagnetic actuator with low friction and high repeatability; high system responsiveness and speed.
Capable of performing tensile, compressive, bending, shear, creep, and relaxation tests.
Meets modern material testing requirements for high precision, high frequency, stability, durability, and reliability.
Oil-free, seal-free, maintenance-free, long life, highly integrated, easy installation, and compact footprint.
Wide selection of clamps and accessories available.
Specifications
| Parameter | Value |
|---|---|
| Maximum Load Peak | 1100 N |
| Dynamic Load Peak | 1000 N |
| Static Load Peak | 700 N |
| Testing Machine Grade | 0.5 |
| Load Measurement Range | 0.4% – 100% F.S. |
| Load Measurement Accuracy | ±0.2% of indicated value (within measurement range) |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Stroke | 30 mm |
| Displacement Resolution | 0.1 μm |
| Test Space (Upper-Lower Fixture Gap) | 0–950 mm |
| Net Weight | Approx. 900 kg |
| Dimensions | Approx. 1000 × 700 × 1800 mm |
| Optional Environmental Accessories | Water bath, high temperature, low temperature, humidity environment, etc. |
| Applications | Fatigue/fracture/static testing of metals, polymers, composites; static/dynamic testing of surgical implants (trauma, joint, spine, dental), polymer tensile fatigue testing, rubber crack propagation testing, etc. |
| Optional Fixtures | Mechanical tensile clamps, compression clamps, bending clamps, femoral stem fixtures, four-point bending fixtures, spinal rod/screw fixtures, tibial plateau fixtures, vertebral resection model compression/tensile fixtures, dental implant fixtures, etc. |
Send product request
Other supplier products
 |
Bearing Friction Torque Measuring Instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Bearing friction torque is an important factor affecting bearing noise, vibration, and life... |
 |
UL94 Horizontal/ Vertical Flame Test Machine，IEC 60695，UL 94 Flammability Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com This machine is designed according to plastic Materials flammability test; It is used to te... |
 |
Wire Harness Connector Air Tightness Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheAir-Tightness Testing Device for Automotive Connectorsis designed to perfo... |
 |
ASTM D2061 zipper slippage tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Zipper Smoothness Tester: This zipper testing instrument is used to test the ... |
 |
Robotic HEPA Filter Scanning System, ULPA Leak Detection Tester Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameters ParameterSpecification ... |
Same products
 |
China factory electrode TGYS125 for power station Selection of advanced | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory electrode TGYS125 for power station Selection of advanced technology, absolutely f... |
 |
Laser Chuck | Seller: Drake precision technology (changzhou) Co.,Ltd. | Laser Chuck Introduce foreign advanced technology and management concept, High precision pro... |
 |
Power Pallet Jack For Sale | Seller: Jinan Hulk Machinery Co., Ltd | Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac... |
 |
Multi Directional Forklift For Sale | Seller: Jinan Hulk Machinery Co., Ltd | Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu... |
 |
Narrow Aisle Forklift For Sale | Seller: Jinan Hulk Machinery Co., Ltd | Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide... |
