Multi-Axis Tribometer ASTM G119
Get a quote:
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Multi-Axis Tribometer is a versatile tribological testing device for studying friction and wear of materials under low to medium load conditions. It supports multiple contact configurations including pin- or ball-on-rotating-disc and pin- or ball-on-plate reciprocating tests. With a lateral indexing function, the device allows continuous exposure of fresh wear surfaces, making it suitable for fundamental tribology research and various standardized test methods.
Application
You can use this tribometer for:
Friction and wear testing of metals, polymers, rubbers, and composite materials.
Pin/ball-on-disc rotational wear tests.
Pin/ball-on-plate reciprocating wear tests.
Studying friction behavior of elastomers and rubber materials.
Evaluating the influence of lubricants on friction, wear, and stick-slip behavior.
Investigating start-up friction and dwell time effects in polymers.
Friction studies on surface coatings and functional thin films.
Simulating friction characteristics of cosmetics or skin-contact materials.
Basic tribology research in teaching and scientific laboratories.
Standards
You can perform tests in accordance with:
ASTM G119 – Guide for Wear Testing.
ASTM G99 – Pin/ball-on-disc friction and wear test.
ASTM G132 – Pin-on-disc wear test with indexing function.
DIN 50324 – Pin-on-disc friction and wear testing.
Parameters
Base Unit
| Parameter | Specification |
|---|---|
| Contact Configuration | Ball-on-flat / Pin-on-flat / Custom samples |
| Normal Load Range | 0.1 – 100 N |
| Load Measurement | Strain gauge force sensor |
| Friction Force Range | 0 – 50 N |
| Friction Measurement | Strain gauge force sensor |
| Humidity Measurement | 10 – 90 % RH |
| Drive Motor | Brushless DC servo, 200 W |
| Loading Actuator | Linear actuator, 12 V DC, 100 N |
| Indexing Actuator | Linear actuator, 12 V DC, 100 N |
| Interface | USB serial interface |
| Control Software | Proprietary control software |
| Installation | Benchtop |
| Protection | Transparent safety shield |
Send product request
Other supplier products
| Finger Tip Abrasion Tester | ASTM ISO Testing Machine | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The applied load is set using dead weights, and the scrub (abrading) distance is a... | |
| Male Side Impact Dummy (RE Type) | ASTM ISO Testing Machine | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Male Side Impact Dummy (RE Type) is primarily used in the following testing an... | |
| Cross Hatch Cutting and Adhesion Tester | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Cross Hatch Cutting and Adhesion Testing provides a relative movement of the s... | |
| Wet Leakage Current Tester | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wet Leakage Current Test System is designed to evaluate the insulation perform... | |
| Textile Spray Rating Tester - lab instrument | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Information The device is a constant temperature a... |
Same products
| PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... | |
| PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... | |
| PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... | |
| PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... | |
| PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |













