Thrust Bearing Rolling Friction and Wear Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Thrust Bearing Rolling Friction and Wear Testing Machine is a laboratory device designed to evaluate the friction, wear, and load-bearing performance of thrust bearings under controlled conditions. It simulates real operational environments by applying axial loads and rotating motion to the bearing, allowing measurement of friction torque, wear rate, temperature, and lubrication efficiency to ensure bearing reliability and durability.
Applicable Standards
(1)ASTM D3702
(2)ASTM G99
(3)ASTM G77
(4)ISO 18535
Product Advantages
Simulates Real-World Conditions: Allows testing under controlled load, speed, temperature, and lubrication conditions relevant to actual thrust bearing operation.
Quantifies Friction and Wear: Provides objective, measurable data on key performance indicators.
Enables Material and Lubricant Comparison: Facilitates the evaluation and selection of the best materials and lubricants for specific applications.
Predicts Bearing Life: Wear rate data can be used to estimate the expected lifespan of thrust bearings.
Supports Design Optimization: Provides critical feedback for improving bearing designs to reduce friction and wear.
Standardized Testing: Allows for testing according to recognized industry standards.
Technical data
| Parameter | Value |
|---|---|
| Maximum radial load | 5 kN |
| Maximum spindle diameter | 5 to 30 mm |
| Spindle taper | DIN 69871A, ISO 50 taper |
| Rotary motion | |
| Speed | 0 to 2000 rpm |
| Continuous torque | 56.4 Nm |
| Peak torque | 136 Nm |
| Oscillating motion | |
| Ranges | variable 0 to +/-20° |
| Frequency | 0.001 to 1 Hz |
| Axial motion | |
| Maximum thrust | 5 kN |
| Stroke | 0 to 30 mm |
| Frequency | 0.001 to 1 Hz |
Send product request
Other supplier products
 |
BBA steady state solar simulator tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and... |
 |
Equipment for Overcharge, Short Circuit, and Thermal Runaway | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The pressure vessel complies with the following standards: (1) UL 9540A:2025 &n... |
 |
Dynamic waterproof bending testing machine for finished shoes | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: It is used to test the dynamic waterproof performance of various fin... |
 |
Steel Hook Strength & Bend Resistance Tester Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications (1)Testing steel shanks or hooks used in men’s shoes, wom... |
 |
1.5 M Long UV Curing Machine For Screen Printing Paper Sheet CE Approved | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product information UV is the ultraviolet (Ultra-VioletRay) English abbreviation. Indust... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
