Button falling weight impact tester

• 

Whats/App: +86 156 1874 6768

Web: standard-groups.com

With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released from a height of 67mm (2.625inch) or other heights as required. Cracking, chipping or breakage constitute failure.

Application

Button falling weight impact testeris used to determine the impact resistance of plastic sew-through flange buttons to a falling mass of 0.84kg (29.5oz), released from a height of 67mm (2.625 inches) or other heights as required. Evaluation Cracking, chipping and breakage, any of which constitutes damage. Test the remaining specimens.

Standards

ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments).

Features

1. Ensure the vertical alignment of tension;

2. Fixed button edge without affecting its adhesion;

3. Consistent force of 10s continuously;

4. Elevate and fix the position of the test meter through the handle, easy to change samples

5. Horizontal hand wheel, designed to cooperate with ergonomic principles to make operators more comfortable;

6. Safety buckle design makes operation more secure and reliable;

7. The long machine frame can extend the test scope more widely;

8. The concealed spring is designed to greatly increase the pin tightening and ensure the test repeatability;

9. Can reduce the damage caused by slid leakage during test process;

10. Simple design and accurate test results.

Parameter

Accessoriess

The accessories for push-button impact drills (often referring to impact drills or similar equipment) mainly include the following types, each serving a different function to ensure the normal operation of the equipment:

Switch accessories: such as impact drill switches and gear selector switches, used to control the start, stop, and gear switching of the equipment, are key components for operating the push-button impact drill.

Transmission and impact components: including motors, shafts, sleeves, ratchet mechanisms, etc. These components work together to convert electrical energy into mechanical energy to achieve the impact function. For example, the motor drives the shaft to rotate, the shaft drives the sleeve and ratchet mechanism to move, thereby generating impact force.

Drill bits and chucks: The drill bit is the component that directly performs the drilling operation, while the chuck is used to fix the drill bit and ensure its stable operation. Different specifications and types of drill bits can be replaced according to the operation requirements.

Protective and auxiliary accessories: such as dust covers and limit ropes. Dust covers prevent dust generated during drilling from entering the equipment and protect it from damage; limit ropes are used to control the range of motion of the impact components and prevent them from separating from the main body of the equipment.

Battery and charger (for electric models): Provides power to the electric push-button impactor, ensuring continuous operation. Battery capacity and performance directly affect the device's runtime and efficiency.

Other supplier products

	Powder Wet Vibrating Screen System For Lithium Battery Material Testing	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Powder Wet Vibrating Screen System is designed for particle size separation and distrib...
	Cone Calorimeter / Cone calorimetric test equipment，Automated Cone Calorimeter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Cone Calorimeter is widely used to evaluate fire performance of materials ...
	Full Notch Creep meter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplas...
	Water Leak Detector	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Water Leak Detector primarily measures the volume and rate of gas released when a subst...
	Automatic Catheter Hydraulic Leakage Tester device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 15812.1: Disposable sterile catheters - Part 1: General requirements Featu...

Same products

	ER4047 Aluminum Mig Welding Wire	Seller: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material...
	ER4043 Silicon Aluminum Welding Wire	Seller: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
	Choosing the Right Equipment for Heavy-Duty Cleaning	Seller: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	Seller: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...