Aircraft Seat Cushion Fuel Burn Test System | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Aircraft Seat Cushion Fuel Burn Test System is a dedicated aviation fire testing platform designed to evaluate the fuel fire performance, flame spread behavior, and combustion characteristics of aircraft seat cushions under controlled aviation fuel fire exposure. The system integrates the FAA-approved NexGen aviation fuel burner with a specialized seat cushion test frame and dynamic motion system, enabling realistic simulation of aircraft cabin fire scenarios while accurately controlling and monitoring fuel and air parameters. Its modular architecture supports both current certification testing and future FAA technical upgrades.
Application
This system is applicable to aviation fuel fire testing of materials and components used in aircraft cabins, with a primary focus on:
Aircraft seat cushions
Seat cushion assemblies
Cushion covers and padding materials
Composite seat components related to fire performance
The FAA-approved NexGen burner provides standardized aviation fuel flame exposure, while the dedicated seat cushion test frame and dynamic motion system allow direct assessment of flame behavior, burning characteristics, and dripping performance under representative test conditions.
Standards
The system is designed to support testing in accordance with the following aerospace fire safety standards:
BSS 7303 – Combustion performance and flame spread behavior of aerospace composite materials
AITM 2.0009 – Determination of flame spread characteristics of aerospace materials
FAR Part 25 Appendix F Part II – Aircraft cabin material combustion, flame spread, and smoke toxicity requirements
Parameters
| Item | Specification |
|---|---|
| Overall dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm |
| System weight | 150 kg |
| Power requirement | 220 V, 10 A |
| Operating temperature | 10°C to 35°C |
| Fuel type | Aviation kerosene |
| Air supply | Minimum 120 PSI compressed air |
| Flame temperature capability | ≥ 2000 ± 50 ℉ |
| Heat flux output | ≥ 10.6 W/cm² |
| Temperature control bath | ≥ 2 × 0.14 m³ |
Send product request
Other supplier products
 |
Thermal Radiation Performance Tester(RPP) BS EN ISO 6942 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The RPP test is mainly used to determine the radiant thermal protection performanc... |
 |
Vacuum Friction and Wear Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Vacuum Friction and Wear Tester integrates a proven friction and wear testing ... |
 |
Pipe coating scratch tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Pipe Coating Scratch Tester, also known as a paint and varnish scratch resista... |
 |
Compressed air filter test bench | The Compressed Air Filter Test Bench is a fully automated system designed to measure the fractionation efficiency of compressed air filters at over... |
 |
Transient Hot-Wire Liquid Thermal Conductivity Analyzer | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Transient Hot-Wire Liquid Thermal Conductivity Analyzer is widely used in rese... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
