Walk-in High Low Temperature Low Pressure Test Chamber

Get a quote：

Whats/App: +86 181 0160 0864

TheWalk-in High/Low Temperature and Low Pressure Test Chamberis a precision environmental simulation instrument designed to replicate high-temperature, low-temperature, and low-pressure composite conditions. You can use it to perform single-parameter or multi-parameter coupled environmental tests on large-scale equipment, ensuring reliability and performance verification under extreme conditions.

Applications

Avionics equipment testing, spacecraft vacuum thermal testing, new energy sectors (high-altitude lithium battery and photovoltaic inverter testing), and electronic equipment stability verification (5G base stations, communication equipment, etc.).

Standards

GB/T 10590-2006 Technical Specifications for High/Low Temperature and Low Pressure Test Chambers

GB/T 2423.25 Environmental Testing for Electrical and Electronic Products. Part 2: Test Methods. Test Z/AM: Combined Low Temperature/Low Pressure Test

GB/T 2423.26 Environmental Testing of Electrical and Electronic Products. Part 2: Test Methods. Test Z/BM: Combined High Temperature/Low Pressure Test

GJB 150.2A Laboratory Environmental Test Methods for Military Equipment. Part 2: Low Pressure (Altitude) Test

GJB 367.2 General Technical Conditions for Military Communication Equipment. Environmental Test Methods

Features

1.Walk-in design accommodates large equipment and multiple test samples simultaneously.

2.Capable of simulating extreme high/low temperatures and low-pressure environments with precise control.

3.Pressure and temperature control systems ensure uniformity and minimal fluctuation for reliable results.

4.Adjustable pressure change rates allow simulation of realistic ascent/descent conditions.

5.Stainless steel chamber construction with sandblasted surface ensures durability and easy maintenance.

6.Multi-parameter coupling allows high fidelity simulation of complex environmental conditions.

Parameters

Item	Specifications
Nominal Internal Volume	12.1 m³
Chamber Internal Dimensions	2500 mm (L) × 2300 mm (W) × 2100 mm (H)
Chamber Structure	Integral construction required for the equipment chamber
Chamber Material	Inner liner made of stainless steel with sandblasted surface treatment
Temperature Range	-45°C ~ +130°C (maintainable under both normal pressure and vacuum conditions)
Temperature Fluctuation	≤±0.5°C (under normal pressure)
Temperature Uniformity	≤2°C (under normal pressure)
Temperature Deviation	≤±2°C (under normal pressure)
Pressure Range	101.3 kPa ~ 20 kPa
Pressure Change Rate	≤10 kPa/min (adjustable); from normal pressure to 1 kPa ≤30 min
Pressure Recovery Rate	≤10 kPa/min (adjustable and controllable)
Pressure Deviation	±2 kPa (normal pressure ~ 40 kPa)±5% (40 kPa ~ 4 kPa)±0.1 kPa (4 kPa ~ 1 kPa)
Pressure Reduction Time	From normal pressure to 20 kPa ≤30 min
Simulated Altitude	≥10.000 meters

Accessories

1.Digital temperature and pressure control system

2.Vacuum pump and pressure regulation system

3.Data acquisition and monitoring software

4.Safety interlocks and alarm system

5.Adjustable shelving and mounting fixtures for test samples

Test Procedures

1.1.Equipment Preparation

Verify chamber integrity, power supply, and control system calibration.

Confirm vacuum pump and pressure regulation system functionality.

Prepare test samples and arrange securely inside the chamber.

2. 2.Parameter Setting

Set desired temperature and pressure profiles according to test requirements.

Adjust pressure change rate to simulate ascent or descent conditions.

Enable data logging and monitoring functions.

3. 3.Test Execution

Start the chamber and allow environmental parameters to reach target values.

Monitor temperature and pressure uniformity throughout the test duration.

Record any deviations or alarms for analysis.

4. 4.Test Completion

Gradually return chamber to standard temperature and pressure conditions.

Safely remove test samples and review data for evaluation.

Other supplier products

	Geotextile wear tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The geotextile abrasion tester, also known as the geotextile abrasion resistance t...
	Helmet Webbing Micro - displacement Abrasion Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet webbing micro-displacement wear testing machine is a comprehensive test...
	Catheter Hydraulic Leakage Tester	Compliance Standards GB/T 15812.1. etc. Main Uses The catheter hydrostatic pressure resistance and leakage tester is a device specifically desig...
	Leather thickness tester / Leather Thickness Gauge	Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f...
	Electro-hydraulic servo dynamic fatigue testing machine	Product Introduction: Electro-hydraulic servo dynamic and static fatigue testing machine (hereinafter referred to as the test machine) is mainly u...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...