Simulated Human Body Underwear Tester

Getaquote:

Whats/App: +86 181 0160 0864

The Simulated Human Body Underwear Tester is designed to evaluate the wearing pressure and contact force between underwear or garments and the human body under simulated wearing conditions. By combining multi-sensor micro-force detection with intelligent analysis software, you can obtain accurate, long-term force distribution data to support functional garment evaluation and wearing comfort research.

Application

You use this tester to assess wearing pressure and contact force of garments under simulated human body conditions.

It is suitable for testing knitted tight-fitting garments, underwear, compression clothing, functional sportswear, medical compression garments, and other apparel where wearing pressure and comfort performance are critical.

Standards

The Simulated Human Body Underwear Wearing Force Tester complies with the following standard:

(1) FZ/T 70015-2022 Test and evaluation method for pressure of knitted tight-fitting garments

Parameters

Item	Specification
Main Sensor Force Range	0–10,000 cN
Main Sensor Accuracy	1%
Micro Sensor Force Range	0.00–200.00 cN
Micro Sensor Accuracy	0.03 cN
Garment Body Shape Control Range	0–50 mm
Power Supply	AC 220 V ±10%, 50 Hz
Overall Dimensions (L × W × H)	1446 × 400 × 248 mm
Net Weight	56 kg

Features

You benefit from multi-sensor micro-force detection for high-precision measurement.

The system provides stable and reliable long-term force monitoring during garment wearing tests.

Test data are recorded in both numerical form and multi-color curves for clear analysis.

The intelligent analysis software supports full-process data recording and evaluation.

A PC-based graphical interface offers intuitive operation and clear visualization.

The tester supports functional evaluation, comfort assessment, and health-related research of garments.

Accessories

(1) Main testing unit

(2) Simulated human body mannequin

(3) Force sensor assemblies

(4) Data acquisition and analysis software

(5) Power cable

(6) User manual

(7) Certificate of conformity

Test Procedures

You dress the simulated human body mannequin with the garment to be tested.

Set test conditions and force measurement parameters through the PC software.

Start the test, and sensors continuously measure contact force at designated body positions.

During the test, the system records force data and generates corresponding curves.

After completion, you analyze the results using the built-in evaluation software.

Maintenance Information

You should regularly check sensor calibration to maintain measurement accuracy.

Sensor surfaces and contact areas should be kept clean to avoid measurement deviation.

Software and data interfaces should be inspected periodically for stable operation.

Routine inspection helps ensure long-term reliability and consistency of test results.

Other supplier products

	Automotive Wire Adhesion Tester	Get a quote： Whats/App: +86 181 0160 0864 The Automotive Wire Adhesion Tester is designed to evaluate the bonding strength of automotive wires an...
	Small Solar Simulator	Getaquote： Whats/App: +86 181 0160 0864 TheSmall Solar Simulatoris a precision laboratory device designed for the controlled simulation of solar ...
	Automated HEPA/ULPA Filter Scanning Test System	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Automated HEPA/ULPA Filter Scanning Test System is designed for automated test...
	Water Leak Detector	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Water Leak Detector primarily measures the volume and rate of gas released whe...
	Geomembrane Texture Height Tester丨Precision Tester for Geomembrane Texture	Meet the standard CJ/T 234- Appendix F-2006.ASTM D7466/D7466M-23 Instrument features Design and manufacture according to the standard, in line w...

All supplier products

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...