Nonwovens Liquid Loss Tester
Get a quote:
Whats/App: +86 181 0160 0864
The Nonwovens Liquid Loss Tester is a precision instrument designed to evaluate the liquid penetration, slip, and loss performance of nonwoven fabric materials. It features a built-in liquid loss platform and sample fixture, enabling standardized testing of absorption and liquid retention characteristics, suitable for both R&D and production quality control.
Application
The tester is widely applicable across multiple industries:
(1) Hygiene products: diapers, adult incontinence products, sanitary pads
(2) Medical textiles: wound dressings, surgical gowns, masks
(3) Filtration materials: air filters, water filters, industrial wipes
(4) Food packaging: absorbent pads, protective liners
(5) Industrial absorbents: oil-absorbing mats, chemical spill pads
(6) Textiles and nonwoven R&D: evaluating new materials, coatings, and treatments
(7) Quality control laboratories: production batch testing, compliance verification
(8) Building and construction: moisture barrier textiles, insulation fabrics
(9) Automotive: cabin filters, absorbent mats, soundproofing layers
(10) Environmental engineering: spill control fabrics, eco-friendly absorbents
Standards
EDANA 152.0-99 (Absorbent Hygiene Products – Liquid Loss Test)
ISO 9073-11 (Textiles – Nonwovens – Determination of Liquid Loss)
Optional references for hygiene products: ASTM F2331. EN 13726-1
Features
(1) Equipped with standardized liquid loss platform and sample fixture to meet test requirements
(2) Integrated dosing device delivers 25 mL of test solution continuously within 4 ± 0.1 seconds
(3) Manual or automatic liquid dispensing, with digital display for accurate timing
(4) Optional weighing system to measure liquid absorption quantitatively
(5) Adjustable slope for controlled liquid flow over the sample
(6) High precision and repeatability for reliable quality control results
Test Principle
A standard absorbent medium is placed beneath the nonwoven sample, positioned on a sloping pad. A specified amount of test liquid is applied to the sample. The liquid penetrates the nonwoven and is absorbed by the medium. By measuring the mass of the absorbent medium before and after testing, the liquid loss performance of the nonwoven sample is calculated.
Technical Parameters
| Parameter | Specification |
|---|---|
| Flow Control Range | 6.10–6.41 mL/s |
| Slope Angle | 25° |
| Slip and Loss Length | 250 ± 0.2 mm |
| Timing | 60 s, ±0.1 s accuracy |
| Slip and Loss Weight | 30 g ± 0.01 g |
| Liquid Volume | 25 mL/test |
| Measurement Method | Gravimetric via absorbent medium |
Accessories
Standard sample fixture
Built-in dosing system
Optional weighing system
Digital display and timing module
Test Procedures / Maintenance
(1) Place the standard absorbent medium under the nonwoven sample.
(2) Mount the sample on the slope pad and secure with the fixture.
(3) Fill the dosing device with test liquid (e.g., artificial urine).
(4) Start the test: liquid is dispensed manually or automatically over 4 ± 0.1 s.
(5) Measure the mass of the absorbent medium before and after the test to calculate liquid loss.
(6) Clean the dosing system and sample fixture after each test to prevent residue buildup.
(7) Perform regular calibration checks for dosing volume and timing accuracy.
Send product request
Other supplier products
 |
Infusion Pump Flow Rate Tester GB 8368 | Compliance Standards GB 8368 - 2018 Disposable Infusion Sets, etc. Main Uses The infusion set flow rate tester is an instrument specifically des... |
 |
Mask BFE Testing Machine - G299 丨Mask Bacterial Filtration Efficiency Tester | Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features 1. ... |
 |
Mattress Durability Fatigue Testing Machine | Get a quote: Whats/App: +86 181 0160 0864Read the measurement on the charge meter. The Mattress Durability Fatigue Testing Machine evaluates the ... |
 |
Automatic thermal deformation Vica softening point tester | Product Introduction: 1. Name: Thermal deformation, Vica softening point temperature tester 2. Model :STD-G-1 3. Product introduction: thermal d... |
 |
Auto wire abrasive belt drag grinding machine | Get a quote： Whats/App: +86 181 0160 0864 TheAuto Wire Abrasive Belt Drag Grinding Machineis designed to evaluate the abrasion resistance of auto... |
Same products
 |
erw pipe making machine | Seller: Shijiazhuang Great Wall Welded Pipe Equipment Co., Ltd. | erw pipe making machine HG76 high frequency straight seam welded pipe production line The... |
 |
China factory electrode TGYS125 for power station Selection of advanced | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory electrode TGYS125 for power station Selection of advanced technology, absolutely f... |
 |
Laser Chuck | Seller: Drake precision technology (changzhou) Co.,Ltd. | Laser Chuck Introduce foreign advanced technology and management concept, High precision pro... |
 |
Power Pallet Jack For Sale | Seller: Jinan Hulk Machinery Co., Ltd | Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac... |
 |
Multi Directional Forklift For Sale | Seller: Jinan Hulk Machinery Co., Ltd | Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu... |
