Fogging Tester
Get a quote：
Whats/App: +86 181 0160 0864
Fogging Tester is mainly used to test the evaporation of volatile components in materials such as interior plastic parts of automobiles and aircraft, polyurethane, textiles, leather, adhesives, non-woven fabrics, and thermoplastic elastomers at high temperatures.
Application
1. Evaluating Material Fogging Performance
The fogging tester is primarily used to evaluate the evaporation of volatile components from interior materials of automobiles, aircraft, and other vehicles at high temperatures. These interior materials include plastic parts, polyurethane, textiles, leather, adhesives, non-woven fabrics, and thermoplastic elastomers. The test reveals the generation of volatile substances from the materials at high temperatures, thus determining their fogging performance.
2. VOC Detection
This instrument is one of the essential instruments for VOC (Volatile Organic Compounds) detection in the automotive interior industry. The test provides evaporation data of volatile substances from interior materials at high temperatures, providing important information for controlling indoor air pollution and ensuring the health of drivers and passengers.
3. Screening Environmentally Friendly Materials
Through testing with the fogging tester, environmentally friendly interior materials that meet environmental standards can be selected, helping automobile manufacturers improve the market competitiveness of their products while reducing environmental pollution.
Standard Test
DIN 75201: Automotive trim material fogging resistance.
ISO 6452: Coated fabrics fogging behavior in vehicle interiors.
SAE J1756: Automotive interior material fogging test protocol.
BS EN 14288 & QB/T 2728: Leather and textile fogging evaluation.
PV 3920/3015: VDA-standard fog value determination for non-metallic materials.
ES-X83231. NES M0161. GM 9305P: OEM-specific fogging requirements for automotive suppliers.
Feature
Dual-Bath System:
High-Temperature Bath: 670×490×540mm, 3kW heating power (up to 150°C).
Low-Temperature Bath: 400×220×520mm, 500W cooling capacity (0–100°C).
Automated Controls:
Digital thermoregulator with microprocessor for precise temperature programming.
Programmable timer (1–9999 min) with auto-stop and end-test buzzer.
Modular Accessories:
18/8 stainless steel test cups, flat beakers, and chrome steel rings for sample mounting.
Six interchangeable cooling plates and haze/gloss measurement kits.
Safety Compliance:
CE-certified with anti-acid epoxy coating, emergency stop, and overpressure relief.
Parameters
| Parameter | Specification |
|---|---|
| High-Temperature Range | Room temperature – 150°C (280°C optional) |
| Low-Temperature Range | 0–100°C |
| Temperature Stability | ±0.1°C (at 200°C) |
| Heat-Up Time | <45 min (to 150°C) |
| Cooling Capacity | 500W (low bath) |
| Power Supply | AC 220V, 50Hz, 3.5kW |
| Dimensions | 500 (W) × 650 (D) × 600 (H) mm |
| Net Weight | 50 kg (excluding thermal media) |
| Data Interface | USB 2.0. remote sensor compatibility |
| Safety Systems | Magnetic switch, thermostat, audible alerts |
Accessoriess
Standard accessories：Main unit *1. constant temperature controller (cooling device) *1. glass beakers (fogging cups) *6.circular glass plates *6. square glass plates *6 (for reflection method testing), haze meter *1. metal rings *6.Fluororubber sealing rings *6. aluminum foil *1 pack, φ80mm sampler *1. dioctyl phthalate (DOP), silicone oil (heat transfer oil) / 32Kg, diisodecyl phthalate (DIDP)
Test Procedures
1.First of all , get the accessories and test samp.
2.Prepare an aluminum foil,place it in the scale to weigh it, and record the value.
3.Place aluminum foil and glass plate over the fog cup.
4.Set the cycle parameters of the low temperature control box, set host temperature and time parameters.
5.Start the instrument,the sample is heated inithe fog cup.
is started.When the timing is reached, remove.
the aluminum paper fZrom the station.
6.Put it into the scale again and weigh it, and record the value.
Send product request
Other supplier products
 |
Spray Aerosol Enclosed Space Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Aerosol spray enclosed space test instrument is used to assess flammability of the... |
 |
High Temperature Voltage Breakdown (Air Heating) Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Computer-Controlled Dielectric Breakdown Tester is a precision instrument desi... |
 |
Gas Fume Chamber | Textile Testing Products | Gas fume chamber is designed to test the color fastness of fabric exposed to nitrogen oxide produced by gas combustion. The testerIncludes test cha... |
 |
Deval abrasion testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Deval Abrasion Testing Machine is designed to measure the wear resistance of s... |
 |
Helmet Wearing Height Testing Machine | The helmet wearing height testing machine is a testing device used to evaluate the comfort and safety performance of helmets. It precisely measures... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
