ASTM E648 Surface Flame Spread Test Apparatus
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Surface Flame Spread Test Apparatus is a high-precision instrument designed for evaluating the lateral flame propagation of materials. It is primarily used in compliance with BS 6853 series railway fire safety standards and BS 476-7 for building materials. This apparatus enables you to determine flame spread ratings based on flame extension length and propagation speed. With an advanced water-cooled sample holder, calibrated radiation panel, and digital flux sensors, you can perform controlled laboratory tests on wall, ceiling, and surface materials to ensure compliance with international fire safety regulations.
Standards
The apparatus supports compliance with the following international standards:
GB/T 8624‑2012 – Classification of combustion performance of building materials
GB/T 27904‑2011 – Flame spread performance test methods for interior decoration materials
GB/T 2406.2‑2009 – Plastics burning performance test, vertical burning method
GB/T 2408‑2008 – Plastics burning performance test, horizontal burning method
ISO 5658‑1 – Fire spread index of building materials, small flame spread test, Part 1
ISO 5658‑2 – Fire spread index of building materials, small flame spread test, Part 2
ISO 5660‑2 – Heat release rate, smoke production, and mass loss, Part 2: Flame spread test method
ISO 5660‑4 – Heat release rate, smoke production, and mass loss, Part 4: Automotive interior materials
ASTM E162 – Surface flammability characteristics of materials (Flame Spread Index, FSI)
ASTM E648 – Assessment of carpet material flame spread
UL 94 – Plastic material flammability testing (Vertical and Horizontal Burning)
BS 476‑6:1989 + A1:2009 – Fire tests on building materials, Part 6: Small flame spread test
BS 6853:1999 – Railway vehicle material flame spread, smoke density, and toxicity evaluation
Features
Large Radiation Panel: 850 × 850 mm with reinforced structural support.
Vertical Sample Holder: Includes standard scale markings to measure flame spread distance and critical heat flux.
Water-Cooled System: Prevents sample holder damage during long-duration high-temperature testing.
Small Flame Ignition: Uses electric spark ignition for consistent flame application.
Automatic Safety Cut-Off: High-temperature sensors shut off gas supply if the radiation panel extinguishes.
Calibrated Heat Flux Sensors: Traceable to NIST for accurate radiation flux measurement.
Digital Control Box: Allows adjustment of gas and air flow with digital display of radiation flux.
PLC & HMI Integration: Displays all test parameters for real-time monitoring and control.
Accessories
Water-cooled sample holder
Calibrated porous panel
Heat flux sensors
Electric spark ignition system
PLC & HMI control system
Gas and air flow regulation valves
Safety interlock devices
Parameters
| Parameter Category | Details |
|---|---|
| Dimensions | 1760 × 1450 × 2130 mm |
| Weight | 678 kg |
| Radiation Panel | 850 × 850 mm |
| Power Supply | 220V, 50Hz, 10A |
| Operating Temp | 10°C – 35°C |
| Gas Requirements | Industrial propane, compressed air |
Application
The Surface Flame Spread Test Apparatus is suitable for a wide range of applications:
Building Materials Testing: Evaluate flame spread on wall and ceiling surfaces according to BS 476-7.
Railway Vehicle Materials: Conduct fire resistance and smoke toxicity evaluations in accordance with BS 6853.
Interior Materials: Assess flame spread for plastics, composites, and surface coatings using ISO 5658-1/2 and ASTM E162 standards.
Laboratory Research: Determine critical heat flux, lateral flame extension, and flame propagation characteristics under controlled conditions.
Recommended test products include wall panels, ceiling boards, interior panels, decorative laminates, plastics, and other surface materials used in public or transport environments.
Send product request
Other supplier products
 |
G506 Filter Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2100:Standard Specification for Performance of Materials Used in Medical F... |
 |
Respirator Fit Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Qinsun PortaCount Respirator Fit Tester assesses the overall integrity of masks by perf... |
 |
UV Sterilizer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product introduction of Environmental test chamber Ultraviolet disinfection technology is ... |
 |
Automated Coating Adhesion and Scratch Test Device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JB/T 8554-1997 Automatic Scratch Test for Coating Adhesion (Mechanical Industry ... |
 |
Walk in pharmaceutical stability chamber for drug testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pharmaceutical Stability Testing Laboratory is a high-precision environme... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
