Leather Seam Fatigue Tester

Get a quote：

Whats/App: +86 181 0160 0864

The leather seam fatigue testing machine is used to test interior materials by subjecting samples to periodic tensile and recovery cycles under specified test conditions. After a specified number of cycles, the maximum needle hole elongation at the seam is measured to evaluate the fatigue resistance of the seam.

Application

The leather seam fatigue testing machine is used to evaluate the fatigue strength of seams in automotive seat surface materials. Automotive seat surface materials (genuine leather, synthetic leather, fabric, etc.) often have a stitched seam structure, and the stitching strength and fatigue resistance of these seams directly affect the lifespan of the seat. By testing the strength and lifespan of the material seams, it is possible to effectively predict the seat's lifespan and identify areas for improvement to extend its service life.

Standard Test

ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis.

SATRA TM55: Seam fatigue testing for footwear, ensuring stitching integrity under cyclic stress.

ASTM D6193: Loop strength testing for leather goods, critical for accessories like belts and bags.

GB/T 3903.32: Chinese national standard for footwear seam fatigue resistance.

EN 13520: Flexometer testing for coated fabrics, validating bonding durability in automotive interiors.

Feature

Quad-Testing Stations: Independent clamping mechanisms for parallel evaluation of seams, loops, or bonded joints.

Customizable Testing Modes:

Seam Fatigue: SATRA/ISO-compliant bending cycles (e.g., 50.000 cycles for footwear uppers).

Loop Strength: ASTM-standard tension tests for leather accessories.

Adhesion Integrity: EN 13520-compliant coating delamination analysis.

Advanced Control System:

7-inch touchscreen with preset protocols for footwear, automotive, and fashion industries.

Adjustable load cell (0–50N) for tension/compression testing.

Fail-Safe Mechanisms: Auto-stop function upon seam failure or cycle completion, with real-time data logging.

Ergonomic Design: Quick-release clamps for rapid sample mounting and tool-free angle adjustments.

Parameters

Parameter	Specification
Test Stations	1–4 (simultaneous operation)
Stroke Frequency	100–300 cycles/min (adjustable)
Bending Angle	0–90° (customizable)
Load Capacity	0–50N (adjustable)
Sample Dimensions	150 × 30 mm (standard)
Control System	PLC with touchscreen (programmable cycles, angles, loads)
Power Supply	220V/50Hz, 120W
Dimensions	600 (L) × 450 (W) × 500 (H) mm
Net Weight	45 kg
Cycle Counter	Digital (1–999.999 cycles)

Accessoriess

Standard accessories

Abrasion test components: 1 piece of H10 abrasion wheel (standard specification for leather wear testing), 1 box of wheel reconditioning abrasive papers (for maintaining the abrasion wheel's surface consistency).

Load weights: 250g, 500g, and 1000g standard weights (to apply specified pressure during the abrasion test, meeting common test standard requirements).

Auxiliary equipment: 1 vacuum cleaner machine (for cleaning debris generated during the abrasion process, ensuring test environment cleanliness and result accuracy).

Basic accessories: Power cord, user manual, certificate of conformity (standard supporting items for normal equipment operation and compliance verification).

Optional accessories

Additional abrasion wheels: Specialized wheels (e.g., CS-10. CS-17 wheels) for testing different leather types (such as soft garment leather or hard industrial leather).

Extended load weights: Lighter (e.g., 100g) or heavier (e.g., 2000g) weights to adapt to non-standard pressure test requirements.

Test result auxiliary tools: Abrasion loss weighing balance (for precise measurement of leather weight loss after testing), surface roughness tester (for evaluating post-abrasion surface smoothness of leather).

Other supplier products

	Fabric Downproof Tester(Rolling Box)	Get a quote: Whats/App: +86 181 0160 0864 The Fabric Downproof Tester (Rolling Box) is designed to evaluate the down-proof performance of textile...
	Helmet UV Pretreatment Box Tester / Helmet UV pretreatment box	Product Introduction Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national st...
	Building Coating Stain Resistance Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Building Coating Stain Resistance Tester is designed and manufactured in accor...
	Haptic Skill Logger	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Haptic Skill Logger is a measurement and recording system designed to quantita...
	Leather Seam Fatigue Tester |Seam Fatigue Tester | Textile Testing Products	Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing for ...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...