Wire-to-Wire Vibration Abrasion Tester
Get a quote：
Whats/App: +86 181 0160 0864
The Wire-to-Wire Vibration Abrasion Tester is designed to evaluate the abrasion resistance of automotive wires with cross-sectional areas below 6 mm² under controlled vibration conditions. The instrument tests the insulation surface of wires under repetitive contact, providing an accurate assessment of automotive wire durability and wear performance.
Application
(1) Automotive wiring harness manufacturers – assess wire insulation abrasion resistance.
(2) Electrical component quality control – verify compliance with wire wear standards.
(3) Research and development – test new wire insulation materials.
(4) Automotive electronics testing labs – evaluate vibration-induced wear on wiring systems.
(5) Certification bodies – perform standardized abrasion testing of low-voltage wires.
Standards
(1) VW60306:2000-11 – Automotive wire abrasion testing standard
(2) GS95007-1:2007-08 – Wire insulation wear test requirements
Parameters
| Parameter | Specification |
|---|---|
| Vibration Frequency | 10 Hz |
| Vibration Amplitude | 6.35 ± 0.25 mm |
| Vibration Direction | Horizontal |
| Fixed Wire Support Distance | 280 mm |
| Movable Wire Support | One point on fixed platform, other passes through guide >14× wire diameter |
| Distance Between Vibration and Fixed Table | 45 mm |
| Friction Point | Midpoint of sample (10% position) |
| Applied Mass | 10 N, 12.5 N, 15 N, 20 N |
| Abrasion Count Setting | 1–9999 cycles adjustable |
| Automatic Stop | When wire insulation is breached and conduction occurs |
Send product request
Other supplier products
 |
Safety Footwear Compression Puncture Tester/ Compression & Penetration Resistance Tester | Test purpose Measure the compression resistance of the shoe head cover and the puncture resistance of the steel plate to prevent the operator from... |
 |
Automotive Sunshade Assembly Line | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Sunshade Assembly Line is an integrated automated production system designed for the eff... |
 |
Oxidation Induction Phase Analysis Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Differential Scanning Calorimeter DSC is designed to determine the inner heat tran... |
 |
Dental Implants Static Torsion Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Dental Implants Static Torsion Testing Machine is a specialized device designe... |
 |
Bag Plastic Buckle Durability Tester - Standard | Product Introduction: It is mainly used to test the service life of plastic plug-ins in luggage accessories. Technical standard: QBT 5247-2018 ... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
