NEXGEN Aviation Fuel Burner
The NEXGEN Aviation Fuel Burner is an FAA-approved, next-generation aircraft fuel combustion testing instrument. It builds upon the operational principles of previous FAA-recognized burners, including Park DPL 3400. Lennox Model OB-32. and Carlin Model 200 CRD, which are now discontinued. You can use the NexGen Burner to precisely control fuel and airflow parameters during tests while maintaining compatibility with future FAA upgrades. This burner supports a wide range of aviation fuel combustion tests, ensuring accurate, reproducible evaluation of flame spread, heat release, and fire resistance for aircraft materials.
Application
The NexGen Aviation Fuel Burner is suitable for a variety of aerospace testing applications:
Aircraft Cabin Materials: Evaluate seat cushions, insulation, and cabin panels for flame spread and smoke toxicity in compliance with FAR 25.853. FAR 25.855. and FAR 25.867.
Cargo Compartment Materials: Conduct burn-through resistance testing on cargo liners and panels.
Soft and Hard Tubing Assemblies: Test fuel, hydraulic, and electrical conduit assemblies under controlled flame conditions.
Electrical Components and Engine Assemblies: Assess fire resistance of electric motor housings, connectors, and wiring.
Material R&D and Certification: Support aerospace material certification for FAA and international standards.
Typical test materials include seat foams, insulation panels, composite laminates, electrical housings, tubing, and other interior aircraft components.
Standards
The NexGen Burner supports compliance with multiple international aviation and safety standards:
BSS 7303 – Aerospace composite material combustion and heat release testing.
BSS 7323 – Aerospace material smoke generation and toxicity evaluation.
BSS 7387 – Aerospace material flame spread and combustion behavior testing.
AITM 2.0056 – Cone calorimeter heat release rate measurement.
AITM 2.0010 – Smoke generation measurement for aerospace materials.
AITM 2.0009 – Flame spread performance measurement for aerospace materials.
FAR Part 25 Appendix F Part II – Cabin material combustion, flame spread, and smoke toxicity testing.
FAR Part 25 Appendix F Part III – Cabin material flame spread and smoke performance measurement.
FAR Part 25 Appendix F Part VII – Cabin material heat release and combustion performance testing.
ISO 2685:1998 – Fire resistance testing methods for aerospace materials.
Domestic Standards: MH/T 6086. HB 7263. MH/T 6041. GB/T 25352. HB 7044 – Various fuel combustion and burn-through testing methods.
Parameters
| Parameter Category | Details |
|---|---|
| Dimensions | 20 mm (W) × 1150 mm (L) × 250 mm (D) |
| Weight | 10 kg |
| Flame Temperature | ≥ 2000 ± 50 ℉ |
| Flame Heat Flux | ≥ 10.6 W/cm² |
| Power Supply | 220 V, 5 A |
| Fuel Requirement | Aviation Grade 2 Fuel |
| Gas Requirement | Compressed air ≥ 120 psi |
Send product request
Other supplier products
 |
Leather Shoe Hook Core Longitudinal Bending Stiffness Tester | Standard： JBS-5131 / 4.18. QB / T1812. T1813 Application: Shanks Longitidinal Stiffness Tester determines the stiffness in the longitudinal dire... |
 |
2-Station Seatbelt Webbing Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 The 2-Station Seatbelt Webbing Abrasion Tester is designed to evaluate the abrasion resistance of seatb... |
 |
Bone Cement Four-Point Bending Fatigue Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Bone Cement Four-Point Bending Fatigue Tester is a specialized mechanical test... |
 |
European standard shrinkage testing machine | European Standard Washer | Product Overview TheEuropean Standard Washer(EN 14399-compliant) is a high-performance fastening component designed for industrial and automotive ... |
 |
Pipe drop hammer impact testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Product Introduction 1. Name: drop hammer impact testing machine 2. Model :G-1 ... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
