Automotive OEM crash simulation male dummy manufacturer
The 50th Percentile Male Crash Test Dummy is a biomechanical surrogate designed for frontal automotive crash testing. It is based on anthropometric data, body mass distribution, and joint characteristics of the 50th percentile adult male in European and American populations. The dummy accurately simulates the mechanical response of a medium-sized male occupant during collisions. It is widely used in regulatory testing, NCAP evaluation, and passive safety system development, serving as a core tool for frontal occupant injury assessment.
Application
You can use the 50th Percentile Male Dummy in the following applications:
Frontal occupant protection testing for passenger and commercial vehicles
Seatbelt restraint performance and injury evaluation
Analysis of frontal airbag deployment characteristics and protection effectiveness
Assessment of dashboard, steering, and pedal impacts on occupants
NCAP frontal crash testing for new vehicles
Human impact studies in aerospace, high-speed rail, military, and special equipment
Biomechanical research in universities and third-party testing institutions
Standards
The dummy conforms to a comprehensive set of standards:
(1) GB 11551 – Protection of occupants in frontal collisions
(2) GB/T 29120 – Anthropomorphic test device general technical requirements
(3) GB/T 24550 – Frontal crash test methods
(4) UN R94 – Frontal crash occupant protection
(5) UN R137 – Full-width rigid barrier frontal collision
(6) ISO 6487 – Road vehicles — Measurement techniques in impact tests
(7) SAE J211 – Instrumentation for impact tests
(8) Euro NCAP – Frontal crash test protocols
(9) C-NCAP – Frontal crash test protocols
(10) US NCAP / IIHS – Frontal crash test protocols
(11) FMVSS 208 – Occupant crash protection
(12) J-NCAP / K-NCAP / ASEAN NCAP / Latin NCAP / ANCAP – Frontal crash test protocols
Parameters
Dimensions
| No. | Name | Dimension (mm) |
|---|---|---|
| A | Seated Height | 883.9 ±5.1 |
| B | Shoulder Pivot Height | 513.1 ±7.6 |
| C | H-Point Height (Reference) | 86.4 ±2.5 |
| D | H-Point to Seatback (Reference) | 137.2 ±2.5 |
| E | Shoulder Pivot to Backplane | 88.9 ±5.1 |
| F | Thigh Thickness | 147.3 ±7.6 |
| G | Elbow to Wrist | 297.2 ±7.6 |
| H | Head Rear to Backplane | 43.2 ±2.5 |
| I | Shoulder to Elbow | 337.8 ±7.6 |
| J | Elbow to Seat Plane | 200.7 ±10.2 |
| K | Knee Front to Backplane | 591.8 ±12.7 |
| L | Foot to Seat Plane | 442.0 ±12.7 |
| M | Knee Pivot to Floor | 492.8 ±7.6 |
| O | Chest Thickness (No Skin) | 221.0 ±7.6 |
| P | Foot Length | 259.1 ±7.6 |
| U | Hip Width | 363.2 ±7.6 |
| V | Shoulder Width | 429.3 ±7.6 |
| W | Foot Width | 99.1 ±7.6 |
| Y | Chest Circumference | 985.5 ±15.2 |
| Z | Waist Circumference | 850.9 ±15.2 |
| AA | Chest Reference Position | 431.8 ±2.5 |
| BB | Waist Reference Position | 228.6 ±2.5 |
Mass Distribution
| Component | Mass (kg) |
|---|---|
| Head Assembly | 4.54 ±0.05 |
| Neck Assembly | 1.54 ±0.05 |
| Upper Torso with Chest Skin | 17.19 ±0.36 |
| Lower Torso | 23.04 ±0.36 |
| Thigh (L/R) | 5.99 ±0.09 |
| Lower Leg (L/R, incl. feet) | 5.45 ±0.14 |
| Upper Arm (L/R) | 2.00 ±0.10 |
| Lower Arm/Hand (L/R) | 2.27 ±0.09 |
| Total Dummy Weight | 77.70 ±1.18 |
Sensor Configuration
| Location | Sensor Type | Channels | Requirement |
|---|---|---|---|
| Head | Accelerometer | 3x1 | ★★★ |
| Head | Angular Rate Sensor | 3x1 | ★ |
| Upper Neck | 6-axis Load Cell | 1x6 | ★★★ |
| Lower Neck | 6-axis Load Cell | 1x6 | ★ |
| Chest | Accelerometer | 3x1 | ★★ |
| Chest | Displacement Sensor | 1x1 | ★★★ |
| Thoracic Spine | 5-axis Load Cell | 1x5 | ★ |
| Lumbar | 6-axis Load Cell | 1x6 | ★ |
| Pelvis | Accelerometer | 3x1 | ★ |
| Lower Thigh | 6-axis Load Cell | 2x6 | ★★ |
| Lower Thigh | Single-axis Force Sensor | 2x1 | ★★★ |
| Knee | Displacement Sensor | 2x1 | ★★★ |
| Knee | 2-axis Force Sensor | 2x2 | ★ |
| Upper Tibia | 4-axis Force Sensor | 2x4 | ★★ |
| Lower Tibia | 4-axis Force Sensor | 2x4 | ★★ |
| Foot | Accelerometer | 2x2 | ★ |
Features
(1) Designed based on 50th percentile adult male anthropometric data, representing medium-sized occupants
(2) Anatomically accurate with realistic mass distribution and joint motion characteristics
(3) Head, neck, chest, pelvis, and lower limb biomechanical response meets Hybrid III series requirements
(4) Supports multi-channel load, acceleration, and displacement sensors for regulatory and R&D testing
(5) Modular design allows easy maintenance, calibration, and component replacement
(6) Widely applicable for regulatory testing, NCAP evaluation, and multi-domain human impact research
Accessories
(1) Sensor kits (accelerometers, angular rate sensors, load cells, displacement sensors)
(2) Calibration tools and jigs
(3) Protective covers and clothing
(4) Mounting adapters and fixtures
(5) Maintenance toolset
Send product request
Other supplier products
 |
High temperature vacum friction & wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The working principle of a high-temperature vacuum friction and wear testing machine is to ... |
 |
Activated carbon wear resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable standards: GB/T 30202.3-2013: This is the wear resistance test standard in the ... |
 |
Computer-controlled Helmet Impact Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A computer-controlled helmet impact tester is an instrument used to test the impact resista... |
 |
Custom PV Hail Impact Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The machine is designed to meet the following key standards: (1) GB/T 9535 &nda... |
 |
Dental Implants Static Torsion Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 13498: Specifies static torsion testing protocols for dental implants, includ... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
