Blow-By Test Rig
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Test system for the characterisation of the oil content in blow-by gases at engine test systems. The Blow-By Test System is a compact measuring system for the determination of the oil droplet content of crankcase gases (blow-by) at engine test rigs.
It combines the precision of a gravimetric measurement of the Gravimetric Measuring System with the time resolution of an optical concentration measurement of the Process Aerosol Photometer.
Additionally, the Process Aerosol Photometer provides the opportunity to measure oil films and oil gushes in pipes e.g. at tilt test stands.
Applications
determination of oil content in blow-by on the engine test stand
evaluation of oil mist separators on the engine test stand
on-line concentration monitoring of oil mist aerosols
Standards
This system supports, or is applicable in accordance with, the following:
(1) ISO 8178: Reciprocating internal combustion engines – Exhaust emission measurement
(2) SAE J1667: Crankcase blow-by measurement methods
(3) ISO 6145 series: Gravimetric measurement of aerosols
(4) EN 1822/ISO 29463 principles: for aerosol particle measurement
Features
time-saving and reproducible determination of oil content in blow-by gases
measurement in the full flow of the blow-by up to 300 l/min
compensation of the differential pressure from gravimetric sampling
high resolution and rapid measurement from optical inline measurements
integration into engine test stands
Technical Data
| Parameter | Unit | Value |
|---|---|---|
| Compressed air supply (operating gas/air) | bar | 6 |
| Aerosol flow rate (operating medium) | L/min | max. 300 |
Send product request
Other supplier products
 |
Aluminum Ointment Tube Toughness Tester 丨aluminium collapsable internal coating continuity tester | The ductility tester for aluminum tubes is a device specifically used to detect the ductility indicators of packaging materials such as aluminum so... |
 |
Geosynthetic direct shear drawing friction tester 丨Geotextile Test Machine | The friction characteristics of the interface of sand/geotextile were determined by testing the contact surface of standard sand/geotextile. This i... |
 |
PV Blowing Sand And Dust Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Photovoltaic Module Dust and Sand Blowing Test Chamber is an environmental reliabi... |
 |
Safety Helmet Impact and Penetration Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Acceleration Impact and Penetration Tester is a specialized test... |
 |
Glass Scratch/Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Glass Scratch/Abrasion Tester is used to test the scratch and abrasion resista... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
