Seat Belt Test Dummy
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Crash Test Dummy for Seatbelt Testing is a high-precision anthropomorphic test device designed specifically for dynamic evaluation and development of automotive seatbelt systems. It represents a 50th percentile adult male, with physical mass distribution and body dimensions accurately modeled. Constructed from metal, fiberglass, and polyurethane materials, it realistically simulates the skeletal and muscular responses of the human body under dynamic seatbelt loading conditions.
Application
You can use this dummy for:
(1) Dynamic performance verification of automotive seatbelt systems;
(2) Development, optimization, and validation of vehicle seats and occupant restraint systems;
(3) Frontal and oblique collision simulation experiments;
(4) Seatbelt design evaluation and occupant injury assessment;
(5) Regulatory compliance testing according to national and international standards.
Standards
This dummy complies with the following standards:
(1) GB 14166-2013 Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 Uniform Provisions for Vehicle Seatbelt and Restraint System Certification;
(3) ISO 15830 Road Vehicles – Side Impact Dummy for Restraint System Evaluation.
Parameters
Dimensional Parameters
| No. | Measurement Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Hip Position Torso Width | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Floor | 510 ± 10 |
| 6 | Hip Center to Floor | 990 ± 10 |
| 7 | Torso Upper Plane to Floor | 1470 ± 10 |
| 8 | Head Bolt Center to Floor | 1600 ± 10 |
| 9 | Head Top to Floor | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Joint Assembly | 1.1 ± 0.1 |
| 8 | Outer Jacket + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Mass (including calibration) | 75.5 ± 1.0 |
Sensor Configuration
| Installation Location | Sensor Type | Channels |
|---|---|---|
| Head | Accelerometer | 3 |
| Chest | Cable Displacement Sensor | 1 |
| Pelvis | Cable Displacement Sensor | 2 |
Send product request
Other supplier products
 |
Shoe peeling strength tester BS 20344 | Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p... |
 |
Luer conical joint multi-function tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Luer Conical Joint Multi-Function Tester is a precision instrument designed to... |
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin... |
 |
Geosynthetic Transmissivity Tester丨Geotextile Test Machine | Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
 |
Large diameter blasting test machine ISO 1167 | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
