Melt Index Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Melt Index Tester (Melt Flow Rate Meter) is a precision instrument for evaluating the flow properties of thermoplastic materials under specified conditions. By automatically extruding polymer melts through a standardized die and measuring the mass or volume flow, it determines the Melt Flow Rate (MFR), providing critical information on polymer processability, molecular weight, and quality control. The instrument supports both manual and automated testing, with accurate temperature control and built-in data output.
Application
(1) Measurement of melt flow properties for engineering plastics including fluoroplastics, nylon, and polyoxymethylene (POM).
(2) Testing low-melting-point thermoplastics such as polyethylene (PE), polypropylene (PP), polystyrene (PS), ABS resin, and polycarbonate.
(3) Quality control in plastic production and manufacturing to ensure consistent polymer performance.
(4) Research and development of new polymer formulations and compounding.
(5) Petrochemical industry applications for raw material evaluation.
(6) Educational and research laboratories in colleges and universities for polymer science studies.
(7) Commodity inspection and testing institutions for certification and compliance testing.
Standards
(1) ISO 1133 – Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.
(2) ASTM D1238 – Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer.
(3) GB/T 3682 – Plastics – Determination of the melt flow rate (MFR).
(4) JIS K7210 – Japanese Industrial Standard for measurement of thermoplastic melt index.
(5) Additional industry-relevant ISO and ASTM standards for polymer characterization and processability assessment.
Features
(1) Rapid heating with minimal temperature overshoot for consistent test conditions.
(2) High-accuracy PID temperature control (±0.1°C) with over-temperature protection.
(3) Automatic recovery to constant temperature after sample loading.
(4) Supports both manual and automatic cutting methods for test sample extrusion.
(5) Built-in Chinese LCD display with intuitive interface.
(6) Integrated printer for automatic result output.
(7) Reliable, stable operation with precise, repeatable measurements.
Parameters
| Parameter | Specification |
|---|---|
| Temperature Control | 50–450°C, PID control, accuracy ±0.1°C (with over-temp protection) |
| Weights | 1200g, 2160g, 3800g, 5000g, 10000g |
| Automatic Cropping Device | Automatic and manual operation (optional) |
| Time Setting | 0.1–999.9 min, arbitrary setting |
| Cylinder Diameter | 9.5504 ± 0.0076 mm |
| Plunger Diameter | 9.4742 ± 0.0076 mm |
| Die/Thin Hole Pattern | External diameter 9.5 ± 0.02 mm, bore 2.0955 ± 0.0051 mm, length 8.00 ± 0.02 mm |
| Machine Size (L×W×H) | 36 × 51 × 60 cm |
| Machine Weight | 40 kg (excluding weights) |
| Power Supply | AC 220V, 5A |
Accessories
(1) Mercurial thermometers (150°C, 200°C, 250°C, 300°C optional).
(2) Cleaning brush and scraper.
(3) Guide material stick.
(4) Observation mirror.
(5) Feedstock funnel.
(6) Three frictioning steel discs.
(7) Two thin hole pattern determination gauges.
Test Procedures
(1) Preheat the cylinder to the required test temperature.
(2) Load the polymer sample into the cylinder and allow it to reach thermal equilibrium.
(3) Apply the specified weight on the plunger for extrusion.
(4) Start the automatic or manual cutting mechanism as per the test method.
(5) Measure the mass or volume of extruded polymer in the defined time interval.
(6) Record results and calculate the Melt Flow Rate (MFR) according to standard formulas.
(7) Repeat tests as needed for multiple samples or repeatability verification.
Maintenance Information
(1) Keep cylinder, plunger, and die clean after each test to prevent residue build-up.
(2) Calibrate weights and temperature sensors periodically.
(3) Inspect cutting mechanism and lubricate moving parts regularly.
(4) Store instrument in a dry, stable environment to prevent corrosion.
(5) Check printer and display functionality before daily operation.
Send product request
Other supplier products
 |
Dry and Wet Retroreflectometer | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Dry and Wet Retroreflectometer, also known as the Dry and Wet Sand Abrasive We... |
 |
Rotary Rubbing Color Fastness Tester (Crockmeter) | Get a quote： Whats/App: +86 181 0160 0864 The Rotary Rubbing Color Fastness Tester, also known as a Crockmeter, is widely used in the textile ind... |
 |
Flexometer / Bally type flexometer | Get a quote： Whats/App: +86 181 0160 0864 Bally flex tester is designed to evaluate the flexural resistance of leather to continual flexure. The ... |
 |
Seat foam compression hardness tester | Get a quote： Whats/App: +86 181 0160 0864 The Car Seat Foam Performance Tester is a professional testing system designed to evaluate the mechanic... |
 |
Sandbag Mechanical Load Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Sandbag Mechanical Load Testing Machine is a precision instrument designed to ... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
