Digital Adhesion Strength Measurement Instrument for Metal Coatings
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Adhesion Strength Tester is a precision instrument designed to evaluate peeling strength, tensile strength, tearing resistance, and surface adhesion performance of bonded materials. By applying controlled, opposing linear motion to test specimens, the tester delivers accurate and repeatable measurements for T-peel, 180° peel, tensile, and tear tests, supporting reliable assessment of material bonding quality.
Standards
JIS L 1066 (Testing Methods for Woven Fabrics)
JIS L 1085 (Testing Methods for Nonwoven Fabrics)
JIS L 1086 (Testing Methods for Textile Products)
JIS P 8139 (Determination of Adhesion and Peel Strength of Paper and Board)
Parameters
| Parameter | Specification |
|---|---|
| Measurement range | Load cells available: 0–100 gf, 0–2000 gf |
| Traveling speed | Clamp traveling speed: 50–500 mm/min |
| Measurement speed | Opposing clamp speed: 100–1000 mm/min |
| Travel distance | Stroke per clamp: 150 mm |
| Specimen size | Maximum: 200 mm × 75 mm |
| Output signal | 0 to ±5 V (within ±0.05% FS) |
| Frequency response | 2 kHz / −3 dB |
| Operating environment | Temperature: 0–50 °C |
| Relative humidity: ≤85%, non-condensing | |
| Power supply | AC 100 V, 50/60 Hz |
| Dimensions | W 630 mm × D 310 mm × H 350 mm |
Features
Wide measurement capability from very low to relatively high adhesion forces
Supports multiple test modes, including T-peel, 180° peel, tensile, tear, and surface adhesion tests
Desktop-type design suitable for laboratory and on-site testing
Portable structure allows convenient measurements in different locations
Simple zero balance and calibration procedures enable quick and intuitive operation
Stable opposing-motion mechanism ensures consistent and repeatable test results
Send product request
Other supplier products
 |
Minimum Ignition Temperature (MIT) – Dust Cloud Tester，ASTM dust ignition tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the explosiveness o... |
 |
MST Medical Compression Stocking Pressure Tester ISO 13994 Medical Compression Garment Testing System | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application 1. Foot, knee, elbow bandages, etc.; 2. Scarves, sleeves, tubes... |
 |
Apparel Drying Dynamics Control System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile Drying Time Tester is a precision instrument designed to measure evaporation ra... |
 |
Geomembrane Fracture Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes ... |
 |
Contact heat resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The contact heat resistance tester evaluates materials' ability to withstand high-temperatu... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
